TOPIC:

Last night I put a shotglass with 20 drops each chlorite/citric solutions in my previously made batch of CDS that had measured 500ppm. Today it tested at 1500ppm (using 29 ml. water to 1 ml. CDS and measuring 50ppm on the test strip...50ppmX30dilution factor=1500ppm) so my dose is 2 ml. CDS with 4 oz. water to equal 3 drops MMS1.

So, bottom line - I am easily confused - what is the final decision on how to do the shot glass method? Thanks in advance.

No final decision yet...next I'll try 40 drops in a gallon jug...goal is 4 oz. CDS@300ppm. I think a gallon jar should leave enough expansion room for the chlorine dioxide gas...will update in a few days.

Please, can we have some pictures how this method should look like?

Also, on ppm, dosage and what it should be achieved, I'd like to point out that ppm is relative measure, while drops of sodium chlorite (or MMS drops as some like to refer to it) are absolute measure.

Why it is different and what I'm trying to say?

Well, it isn't important how much ppm there is in CDS solution if we want to enter certain number of MMS drops of CD in ourselves. For example, let's say that I need to enter 24 drops of MMS on any particular day. This means that I'll make my CDS from 24 drops of MMS (24 drops of sodium chlorite and 24 drops of citric acid), let all CD dissolve in water and this is CDS. It's strength doesn't matter as I will need to drink it relatively diluted. So I could start with one or two litters, it doesn't matter.

What matters is that I enter 24 MMS drops worth of CD in myself in one day if I need to take 24 drops that day. Of course, if I need more or less, I'll produce CDS with more or less drops, but thing is, we need to discern absolute and relative measures.

Ppm is relative and is important if we have to try and guess how much drops of MMS we are actually taking. But, if we are able to produce CDS day by day and for that one day, we doesn't need to now ppm of CDS as we use number of MMS drops as our dosage guide.

And I think that all these methods (shot glass, syringe and similar) provides us with methods for daily production of CDS and that we could use all of produced CDS in one day, so we only need to know how many drops we used, making ppm irrelevant.

I hope that I made myself clear why ppm isn't important in case if we produce CDS each day for that day.

Knowing that my CDS solution is 1500 ppm means I take 2 mililiters of it to equal 1 ml of a 3000 ppm solution.

My latest batch was made using a smaller glass jar (it is 3 3/8 inches diameter and 3 3/8 inches tall) I put 4 ounces of water in the jar and set a shotglass with 40 drops each of chlorite and citric solutions in it inside the jar. I then screwed on the jar's plastic lid and covered it with a dishcloth (to protect from light) and let that sit overnight. In the morning I put the jar in the fridge. In the afternoon I tested the strength of the CDS by putting one ml CDS in 29 ml's of water. The test strip read 50 ppm so 50 ppm multiplied 30 times equals 1500 ppm.

Next time I want to do 60 drops of activated MMS since my goal is a 300 ppm solution.

dear , i am shoping cds 3000ppm from internet , but now is no possible to post cds , so i am so worry

to have cds for my protocol .two times i try to make it as mr humble teach it in dvd , but i am not succecful .

so pls teach me clearly ur way .it looks easly . thank for ur help .

parvin

Masoomi:

1. Put 4 0unces of water in a glass jar with a plastic lid.
2. Put 60 drops of sodium chlorite solution in a shot glass (a small one ounce glass)
3. Put 60 drops of citric acid solution in the same shot glass.
4. Put the shot glass containing the now activated MMS (should be turning brown and smelling like chlorine) inside the jar and close the lid.
5. Cover the jar with a cloth and leave it for 8 hours. After 8 hours put the jar in the refrigerator. After 4 hours or more in the refrigerator remove the shot glass and quickly put the lid back on the jar.

Makes a 1500 ppm solution. Use 2 cc's per dose. So for protocol 1000 use 2 cc's CDS in 4 ounces water 8 times a day.

dear , thank u so much for ur post , which citric acid i should to use , 50 % or more , u know i

make citric acid with the powder . i buy from food shop and for 50% , i put 50 water and 50 citric acid powder

that way i am able to make any persentage i need . so u pls tell me for making cds with ur way , which citric acid

is requir .

parvin

parvin, from his how-to instructions, he's using the 50% citric acid.