Welcome, Guest

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

Shotglass method to make CDS

Page:
1
2
3
4
5
6
7
8

TOPIC:

Re: Shotglass method to make CDS 03 Aug 2012 04:06 #20744

sungazer Topic Author Offline New Member Posts: 17 Thank you received: 23	I just tested a 4 ounce batch of CDS I made using 5ml each chlorite and citric solutions in the shotglass. It still tested at 1500 ppm. I'm concluding that 1500 ppm is as strong a CDS I can make with this method (I get the same strength CDS using 80 drops as I do using 135 drops chlorite/citric sol. in the shotglass.)
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 03 Aug 2012 04:09 #20745

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	How long did you let it sit? I found that my 4 oz batches didn't get as much as my 8 oz batches - don't know why. It was weird.
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 03 Aug 2012 04:47 #20753

sungazer Topic Author Offline New Member Posts: 17 Thank you received: 23	I let it sit about 24 hours, 12 hours was in the fridge. MMS in the shotglass was the same color as the CDS when I finally removed it after the 24 hours.
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 03 Aug 2012 14:38 #20761

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	That was what I found with my 4 oz attempts.
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 15 Sep 2012 00:32 #23432

Evanir
Offline
Elite Member
Posts: 194
Thank you received: 85

Pam,

I need your help. Although I read all the posts on this thread I don't know how to measure my finished CDS with the High Range insta-test strips.

I am talking about the shotglass method.

After I take out the shot glass bottle and I have 1/2 a quart of distilled water that became CDS, do I then take what size of sample to dip the strip?

And if I get a 25 is that the correct strength? or do I add the other 1/2 quart of water to measure?

Thank you for clarifying for me.
evanir

Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 15 Sep 2012 12:53 #23439

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	Add the extra water, stir to be sure the gas is well mixed, then you're looking at a full liter or quart there. You can pour a little into a shot glass and put the test strip in for 2 seconds. If you have a 25 at that point, you're getting 3 drops of MMS equivalent to a dose. The following user(s) said Thank You: Evanir
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 15 Sep 2012 17:21 #23454

Evanir
Offline
Elite Member
Posts: 194
Thank you received: 85

Thanks a million!
I tested my full quart right now that was for one day supply (24 drops of each and 14 hours in the making and after ready I diluted to make it for 2 days). The test strips shows on 50, is that too strong?
I am not feeling any nausea and still breathing better but would like to improve even more so I can decrease the prednisone slowly as my doctor is recommending. I have a great naturopath/chiropractor
who likes MMS.

Thanks Pam!

Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 15 Sep 2012 18:44 #23462

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	Nope, in the original vid where jim was blowing into the baby bottle, and moving the gas over that way, at the end of the vid he was testing and he asked Mark, off camera, what the allowable parameters were and Mark said 30-50 - so there's some flexibility. The following user(s) said Thank You: Evanir
	Please Log in or Create an account to join the conversation.

Re: Shotglass method to make CDS 18 Sep 2012 20:38 #23638

KennethWalter
Offline
Elite Member
Don't worry, be happy...
Posts: 280
Thank you received: 70

I'm just starting to "get' the advantage of the shot glass method over the puff method.

and of course, not until after getting the baby bottles and tubing etc...

But that's ok...I'm not gonna lose sleep and it gives me something to mess around with anyways.

I am checking out a cpl jars where I won't have to putz around with non metal tongs to get the shot glass in the jar...here's a link

www.crateandbarrel.com/search.aspx?query=glass%20jars

specifically, I'm looking at the 64oz heritage jar and the smaller, WECK canning jar 9oz & 10oz. BOTH appear to have large enuf openings so as not to need the tongs ....the large one has no gasket, the WECK has one that I better remove...and I can add porous hockey tape to slow down any gasses trying to get out of either jar.

Is anyone concerned the smaller jar may not provide enuf room for expansion of gasses? remember I'm removing the seal.

just thought I'd share.

please don't hesitate to make your comments...good or otherwise
=====================
UPDATE!!!!

I bought the 64oz heritage house....for jumbo batches, plenty wide to set in shot glass by hand,
and two weck jars 18oz.....the wecks are perfect for doing 4oz of water, wide enuf to place the shot glass inside without tongs
I'll get pix asap

kw

I recently came upon MMS and FGHP therapy at the same time. And NOW more recently, I stumbled into old therapies, like turpentine!
And I always support peoples right to choose whichever therapy they see fit to take!
augmentinforce.50webs.com/Turpentine%20Therapy.htm
youtube- daniels, why turpentine is good for your health most excellent info with instructions and warnings for proper preparation prior to using turp should you choose to do so.
diamond g in georgia was the best turp I found.
www.biologicaltherapeutics.com/documents/Scientists%20Trace.pdf
also check out the borax conspiracy about arthritis, worth your time to read.

;-)

The following user(s) said Thank You: Evanir

Please Log in or Create an account to join the conversation.

Last edit: by KennethWalter.

Page:
1
2
3
4
5
6
7
8

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

Shotglass method to make CDS

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.