TOPIC:

yes Pam this makes sence...i was wondering of how to make the full 8 hour dose My son has a small fridge i can borrow ...thanks Pam.

Small wrote:

When doing the shot glass method does the jar have to be exactly 2 quarts ?

I have LaMotte High Range Chlorine Dioxide Test Strips
the range is:

0 10 25 50 100 250 500

how do I measure 3000ppm ?

Does the jar have to be glass or can I use plastic?

Sungazer - I need some help here, because we've got 3 different sets of directions, some for 20 drops, some for 40 drops, some for 60 drops. What was the final result, pls? And were you making MMS for storage (i.e., 4 oz of 3000ppm/L) or for the daily 1L (i.e. 24 drops activated in 1L of water) dose? Can you test your dropper and let us know how many drops are in a cc or mL (same thing) -

This is really important, because if it is this easy (and i'm not doubting you at all), then people who feel uncomfortable making MMS can do it easily - even have an unknowledgeable caregiver prepare it . And we do have people who are so sick that they are uncomfortable doing anything the least bit confusing.

Pam

I have a ceramic bowl with a tight fitting cover that a shot glass will fit into, however, my shot glass so far is a plastic pill dispenser. I have not yet been to Wal-Mart, and my Family Dollar didn't have any glass bowls with plastic tops an I forgot to look for a glass shot glass. Does it have to be a glass shot glass? Should I put it out in the sun for 8 hours or keep it inside. I'm sorry but I live in a remote area that just recently got a post office.

close the lid.
5. Cover the jar with a cloth

This is confusing. If I close the plastic lid why cover it with a cloth? Should I take the tight cover off mine?

Sandy

I'm guessing it's 1. to keep more light out, or 2. just in case the gas builds up too high and the bottle breaks, it provides a little "protection" - this may not be needed.

The towel is NOT a substitution for the lid in these directions, as I understand it.

I'm going to play today. Will let you guys know what happens.

Pam

Pam
I store the 4 ounces of 1500 ppm CDS in the fridge and add 2cc/ml to 4 oz water in a drinking glass to make a (3 drops MMS1 equivalent) dose for the protocol 1000.

3 cc/ml each of chlorite and citric acid solutions (activated MMS1) in a glass shotglass (glass since we don't know if plastic reacting to MMS creates harmful byproducts) can be used instead of counting drops and is more accurate.

I use a wide mouth glass honey jar (3.5 inches diameter and 3.5 inches tall) with plastic lid. I cover it with cloth to protect it from light degradation and in case the glass should shatter.

To test the finished CDS I used the LaMotte test strips. I diluted 1 cc/ml CDS with 29 cc/ml water and got a reading of 50 ppm from the test strip. 50 multiplied 30 times renders 1500 ppm for the actual undiluted CDS.

I did mine between 2 pm and 10 pm using the ceramic bowl with the tight plastic top. I put it in a cupboard. It didn't explode. I tested with 9 cc of water with 1 cc of CDS and it tested between the 100 and 250. So do I just give more if it?

Sandy

Sungazer - thanks. You're testing 20 drops, then 40 drops, then 60 drops, according to various posts in the thread. So, I'm still a bit confused.

I will tell you what I did.

Around 4pm yesterday

My dropper bottles have the accudrop tip which holds 24 drops = 1mL (tested)

I made a regular day's dose of 1 quart with 24 activated drops of MMS, and put it in my fridge, tightly covered. I will test it for ppms today.

I took a half-gallon wide mouth jar (2 quarts) filled with 1 quart of distilled water, and 24 drops of MMS/CA in a shot glass, and set the shot glass into the jar with the water. It floated. I put a plastic lid on tight, and put it in my root cellar. Will check this morning, when I get off the computer, and will test for ppm's - the only confounding variable is that the floor of my root cellar is cold - (concrete). This is to check for making a daily 1 quart dose. I will compare the ppms with the regular day's dose above.

Setup for the 1/2 gallon



Clearer photo of setup



Placing the shotglass



Plastic wide mouth caps that work for all of the Ball wide mouth jars.



I took a wide mouth pint jar (2 cups) and put in 4 oz of distilled water. I tested 3mL of MMS/CA activated, and set the shot glass in it the jar. I put the plastic lid on tight, and it joined the half-gallon jar in the root cellar. Will check this morning for ppms' This is for making the stronger CDS, which you would then add to a quart for a daily dose. The advantage, of course, is that if the CDS is fine, you can adjust the amount of CDS in your dose to make various strengths of doses.

Set up for the pint jar - I use separate syringes for the MMS and for the CA so that they don't contaminate the storage fluids.







Does anyone want anything else tested? <G>