Welcome, Guest
Username: Password: Remember me
### Research Section Disclaimer

None of the products, protocols or methods here have been approved by Jim Humble. This is the research forum and was set up for those wanting to discuss and experiment with MMS, and new complimentary technologies. Any experimentation that you personally do is at your own risk. Before anything is submitted for approval it must be first approved by Jim Humble in writing and posted under his account. The main source for approved material, protocols etc, is in Jim Humble's latest book at www.jhbooks.org Each person using this Forum is considered to be completely responsible for themselves and their own personal health. Any experimentation that you personally do is at your own risk.

TOPIC:

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 20 Nov 2011 17:10 #8338

  • Alanti
  • Alanti's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 57
  • Thank you received: 8
Hello.
I have a question about the preparation of a chlorine dioxide solution (CDS).
Why is it necessary to use a saline solution in order to adsorb the ClO2 into it?
Isn't it enough to use standard water in the case the CDS is intended for drinking or distilled water in the case the CDS is for intramuscular or IV injections?
Thank you for your explanation.
Alanti

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 21 Nov 2011 15:48 #8359

  • Jim Humble
  • Jim Humble's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • As always with love
  • Posts: 28
  • Thank you received: 150
CDS can be made using distilled water, just plain drinking water, or saline solution purchased as an Intravenous solution. I PREFER DISTILLED WATER. If you use ice water with ice on the outside of the CDS container that you are making the temperature of the CDS will be about 40 degree F. At that temperature once that solution (CDS) is saturated then 1 CC or 1 ml will equal a 3 drop dose when added to 4 ounces (1/2 glass) of water.

As far as intravenous use is concerned only one test has been made so far and that was successful, but because only one test so far you must realize that you are on your own as far as intravenous is concerned. Muscle injection has been tried a few times only. It seems to be painful for only a minute or two and then the pain seems to reduce. We did 1 CC inter muscle which equals a 3 drop dose. But we have not finished the research.

Jim Humble
The following user(s) said Thank You: Edwin3110, Michael Harrah, oltex, Victor, Polak, Peter Mican, Nir, pam, ruby74869, Edi, Search4Truth

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 21 Nov 2011 15:53 #8360

  • Jim Humble
  • Jim Humble's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • As always with love
  • Posts: 28
  • Thank you received: 150
CDS should travel OK, BUT as far as shipping by overnight that should be OK if they will allow it. OTHERWISE, I think that they allow less than 1 ounce of most any thing in the US. Just use a good container.

We are just learning about CDS and all the data is not in yet.

Jim Humble
The following user(s) said Thank You: Edwin3110, Michael Harrah, oltex, Peter Mican, Nir, pam, ruby74869

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 21 Nov 2011 16:52 #8362

  • Alanti
  • Alanti's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 57
  • Thank you received: 8
Jim, thank you for your clarification about how to use distilled water in the preparation of CDS.
As far as intravenous use is concerned, apparently there is something going on in Germany. Probably you know about it.
Alanti
The following user(s) said Thank You: Michael Harrah, ruby74869

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 22 Nov 2011 08:10 #8370

  • daquick
  • daquick's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 3
Michael,
Great pictures! I decided to try a different approach. Have bought most of what I need and will get the rest next weekend when I have the time.
I bought 4 metal tires valves--take out the guts so that it is completely open. I'm going to drill holes in the tops of wide mouth canning jars and install these, as the rubber gaskets they come with will seal them to the lids, and then connect the 1/4 inch tubing to them. Small wide mouth jar for the sodium chlorite and a quart jar to develop the cds gas into.
Will keep you posted as to how it works.
daquick
The following user(s) said Thank You: Michael Harrah

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 22 Nov 2011 17:26 #8377

  • pam
  • pam's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4593
  • Thank you received: 3702
I thought about that, but also was concerned about metal lids. You can, however, get plastic lids for the canning jars.

I am using the stoppers from the wine making store, the ones with holes in them. (I had bought a bunch to use to make sauerkraut-making kits for friends for Christmas) - The holes exactly hold 3/8 inch tubing from the hardware store. So, it's either slip a venting needle (whatever is used) in with the 3/8 inch tubing, or drill a small hold in the stopper to hold the venting needle. I may well go the second route.

When I get my first batch done, will do photos and post here. We have some grand opportunities to share our ideas - I am hoping others will share their photos, like Michael did.
Pam
The following user(s) said Thank You: Michael Harrah

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 23 Nov 2011 03:27 #8387

  • Edwin3110
  • Edwin3110's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 652
  • Thank you received: 515
Today i will be making my first CDS....

Formula: 3g Sodium Bicarbonate into 800ml chilled filtered water.... 6% HCI as an activator to prevent hassle from using hot water to generate the CD gas as said by Steve... 6% HCI at 40ml + Sodium Chlorite 40ml...

Will try it and give feedback by today evening...
Minister of Health, Penang. Malaysia.

Creator of CDH Plus 1000
A Protocol that can adjust the strength of CD and SC for individual needs.
Read More

Easy way to support Jim Humble, MMS
The following user(s) said Thank You: Michael Harrah

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 23 Nov 2011 03:49 #8388

  • Michael Harrah
  • Michael Harrah's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1209
  • Thank you received: 1554
Hi Edwin,

Are you using 5% sodium chlorite solution or 28%? Steve was talking about using only a 5% sodium chlorite solution with the 6% HCl because otherwise the reaction would be too strong, possibly violent.

I have been using 4% HCl for my activation of the MMS in my gas generating.

Michael

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 23 Nov 2011 10:04 #8393

  • Edwin3110
  • Edwin3110's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 652
  • Thank you received: 515
I used the 25% Sodium Chlorite Solution... we are not able to obtain the powder form....





















Minister of Health, Penang. Malaysia.

Creator of CDH Plus 1000
A Protocol that can adjust the strength of CD and SC for individual needs.
Read More

Easy way to support Jim Humble, MMS
The following user(s) said Thank You: Michael Harrah, Victor, Peter Mican, JLong, pam

Please Log in or Create an account to join the conversation.

Last edit: by Edwin3110.