heart MMS0 - MMS1 now w/Zero Taste

More
10 Feb 2014 18:58 - 10 Feb 2014 19:06 #39819 by JB13
Replied by JB13 on topic MMS0 - MMS1 now w/Zero Taste
Rev Ray said:

I believe the math of my system is 1 ml of MMS , 1 ml of Activator in bottle with 28+ parts air...so keeping a lid on it, is key. And Cool.


I would like to measure the CLO2 concentration using your method, so if you can tell me how long you activate, I will duplicate your method.

I presume you take out enough drops for the first dose of the day right after the activation is completed. Or, do you immediately put the now activated bottle of MMS in a fridge? If not, how long before the bottle is put in a fridge. Also, I am assuming that you do not add any water to the 1ml SC + 1ml acid.

Thanks.
Last edit: 10 Feb 2014 19:06 by JB13.

Please Log in or Create an account to join the conversation.

More
10 Feb 2014 19:16 #39821 by windsurffrek
Replied by windsurffrek on topic MMS0 - MMS1 now w/Zero Taste
Thanks a lot for the information.

I guess you could also mix half in the morning and the other half at lunch break to make sure it's even fresher.

Another thing that I've been thinking is that the pill method would be great for pets like dogs.

I give my dog vitamins like that. I just opened up his mouth stick the pill way in the back of his throat, close his mouth and blow in his nose and he usually swallows it.

The pill method does seem like the best way to go.

Thanks again!
The following user(s) said Thank You: Rev Ray, Rev Glenda

Please Log in or Create an account to join the conversation.

  • Rev Ray
  • Rev Ray's Avatar Topic Author
  • New Member
  • New Member
More
10 Feb 2014 19:32 - 10 Feb 2014 19:34 #39823 by Rev Ray
Replied by Rev Ray on topic MMS0 - MMS1 now w/Zero Taste
Hi JB
In past we activated for 20 seconds using 50%CA.
Sometimes activation is longer if doing something else at time.
I now recommend 60, however activation occurs in mixer, and contines to activate in cap, and in stomach before cap melts so I'm guessing we have a 5 minute max activation time overall if 60 seconds is our start point.
So maybe you could help us by activating MMS using 50 and HCl at different time intervals to reveal the best time period to wait for activation.
CA 10 if you have lab time available..
Thank you.

I have decided to use HCl in my wet kits I sell locally. Dry kits of MMS powder and Citric acid crystals for shipping.
That said I shipped HCl this AM....

I expect the outcome to be same as any MMS1 1:1 ratio strength.
Activating in mixer with cap on helps retain the ClO2 though likely not as well as CDH.
That said we do know we are experiencing issues with CDS and Malaria for instance and am curious to know if the acid left behind in CDS is what is somehow stopping CDS from achieving desired results

MMS Zero, all the goodness, none of the taste...
Last edit: 10 Feb 2014 19:34 by Rev Ray.

Please Log in or Create an account to join the conversation.

  • Rev Ray
  • Rev Ray's Avatar Topic Author
  • New Member
  • New Member
More
10 Feb 2014 19:39 #39824 by Rev Ray
Replied by Rev Ray on topic MMS0 - MMS1 now w/Zero Taste

windsurffrek wrote: Thanks a lot for the information.

I guess you could also mix half in the morning and the other half at lunch break to make sure it's even fresher.

Another thing that I've been thinking is that the pill method would be great for pets like dogs.

I give my dog vitamins like that. I just opened up his mouth stick the pill way in the back of his throat, close his mouth and blow in his nose and he usually swallows it.

The pill method does seem like the best way to go.

Thanks again!


I think mixing half in AM half at lunch is a very good idea, thank you.
As long as the animal gets water to melt the capsule and dilute the solution in the capsule I see no issue.

I too believe for classic MMS1 ingestion MMSZero is the way to go.
Thank you for the support, ideas and comments
:)

Please Log in or Create an account to join the conversation.

More
10 Feb 2014 19:55 #39826 by windsurffrek
Replied by windsurffrek on topic MMS0 - MMS1 now w/Zero Taste
Your welcome,

You can make any dog drink liquid just by giving him or her chicken soup broth which can even be made with just the skins of chickens that most people throw out.Maybe a little salt.

PS. I've been thinking a lot about that MMS ice idea. I was thinking about making a mold about a little smaller than the size of the gel cap and pouring the solution into the mold freezing it, then sliding them into the gel cap and keeping them in the freezer until needed and swallowing them frozen.

Please Log in or Create an account to join the conversation.

  • Rev Ray
  • Rev Ray's Avatar Topic Author
  • New Member
  • New Member
More
10 Feb 2014 20:00 #39827 by Rev Ray
Replied by Rev Ray on topic MMS0 - MMS1 now w/Zero Taste
I too thought the ice idea was interesting.
If one could make icelets of MMS to retain ClO2...your idea sounds promising.
what comes to mind now though is, under tongue one will not taste MMS. So MMS ice, under tongue swallowed, may be another potential, no cap required.

Please Log in or Create an account to join the conversation.

More
10 Feb 2014 20:06 #39828 by windsurffrek
Replied by windsurffrek on topic MMS0 - MMS1 now w/Zero Taste
Did you ever think of dipping it in honey before swallowing?

Please Log in or Create an account to join the conversation.

More
10 Feb 2014 20:12 #39829 by JB13
Replied by JB13 on topic MMS0 - MMS1 now w/Zero Taste

...so I'm guessing we have a 5 minute max activation time overall if 60 seconds is our start point.


Rev Ray, if you add the two ingredients to the 30ml (1 fl oz) bottle, cap & shake it and then wait just 10 minutes, you will have (are you ready for this?) CDH.

If you do that, then there is no need for me to measure the CLO2 ppm as I already know what it is.

When I filled a 30ml bottle with 15ml of SC and 15ml of 4% HCL, waited 10 minutes and then measured the CLO2 concentration, the result was 44,000ppm. That works out to be 1320mg CLO2 or 1.8mg of CLO2 per drop of the CDH solution. That test was done without cooling down the CDH, so I lost some CLO2 when the bottle was opened.

If I put just 11 drops of this CDH in a capsule, then I will be getting my usual hourly dose of 20mg CLO2.

However, by swallowing the capsule, I would be missing out on the benefits of using the Mouth Holding Method (MHM). (Perlingual & sublingual absorption of CLO2)

Such as taking away the tooth pain I mentioned in another thread today on the forum. And, since we now have CDH and not MMS, which is partially activated at 60 seconds, there should be no taste issue. And using the MHM, there is no throat irritation either.

Have we just discovered the perfect methods to ingest MMS? :lol:

Please Log in or Create an account to join the conversation.

  • Rev Ray
  • Rev Ray's Avatar Topic Author
  • New Member
  • New Member
More
10 Feb 2014 20:19 #39830 by Rev Ray
Replied by Rev Ray on topic MMS0 - MMS1 now w/Zero Taste

windsurffrek wrote: Did you ever think of dipping it in honey before swallowing?


Honey dipped MMS...oh my...lol
Earlier I was thinking of Julie Andrews A Spoonful of Sugar (makes the medicine go down) but could not see how this would work.

There need to be "tricks" at times to get MMS into body, so I like this idea too.
Thanks!

Please Log in or Create an account to join the conversation.

More
10 Feb 2014 20:34 #39832 by windsurffrek
Replied by windsurffrek on topic MMS0 - MMS1 now w/Zero Taste
"Honey dipped MMS...oh my...lol"

How about honey flavored MMS pop sickles! :woohoo:

Just kidding..... but who knows. :silly:

Please Log in or Create an account to join the conversation.

Time to create page: 0.358 seconds
Powered by Kunena Forum