Non-Acidified Sodium Chlorite for Disease Prevention and Healing

Hi again scott
im up to 5 drops unactivated in a liter, iv cured my cold yay! But i noticed my mouth reacting and healing some sensitive teeth. I now have a bottle of cds and want to make up a mouth wash, but cant quite work out how much to use and how much water to add?. It says 10 drops mms but not how many if cds? Says in mls and thats where i get lost. Thank you
maddy

Hi Gray,

I have brushed my teeth and gargled with CDH twice a day for about 3 years now and it's pretty much the same as CDS, especially when it comes to how to dilute it with water for a mouth wash.

Assuming what you have is 3000ppm CDS, if you put 1ml of it in 100ml of water, you'll have a mild solution of 30ppm which is pretty close to what I use to brush my teeth and gargle. If you'd like it to be stronger, say 60ppm, which is a good idea if you have a painful tooth infection or something, then you can either double the amount of CDS to 2ml per 100ml of water or cut your water in half to 50ml of water. If you're just going to use it as a mouth wash, then 50ml is probably enough, and it could even be enough to brush your teeth with too if you're careful. If you can keep your water amount low, you can save more of your CDS.

You can make it even more concentrated but be careful because it can irritate inside your mouth.

Let me know if you need any more help.

Scott
PS. Here's the link to EndMemo a site with a dilution calculator. I use the last one on the page:

www.endmemo.com/bio/dilution.php

they could double-dose each hour by reducing the water some (maybe down to 150ml per drop) and then taking a dose at half hour intervals (I've done this before and it worked great). Additionally a person could even triple dose each hour by taking a drop every 20 minutes.

Yes, that is what I was suggesting. Others may not be as sensitive as you to ingesting MMS. Each person will have to find the proper MMS to water ratio for themselves.

And I understand that you are using this method primarily for maintenance dosing and for on-the-go use. Of course, the method can be used at home as well where there is plenty of water available.

Maddy, I brush my teeth with CDS. I use a small amount of water in a shot glass and add three 'droppers' of 3000 ppm CDS. Measured the amounts as 8 ml of water and 2 ml of CDS. That is a ratio of 4:1, four parts water to 1 part CDS. Then I brush four minutes using a Sonicare toothbrush.

My neighbor, who has serious teeth problems with pain, uses a much stronger mix of CDS (3000 ppm) mixed with a little water. Sometimes its so strong CDS will burn the inside of his mouth and the skin will peel away! But, his tooth pain is gone and coffee stains on his front teeth are also removed.

It says 10 drops mms but not how many if cds? Says in mls and thats where i get lost.

I presume you are following Jim's teeth brushing protocol from his book. If you check this conversion chart for non-ingestion use of CDS compared to MMS1 you will see that a 10 drop MMS1 dose is approximately equal to 2 ml of CDS. At one time Jim was going to include my charts in his new book, but at the last minute decided not to.

Hi thank you for all that info, im starting tomorrow and will be starting with the 2ml mix. Iv got a dentist appointment on 30th of jan, looking forward to needing nothing done! Yay!
Maddy

Hi scott
thank you for helping me work out amounts, starting on 2ml tomorrow!
Maddy

Scott, I chatted with Ray today and he says you are using ten times (10x) more water than he or Greg use. Ray recommends people start with 1 MMS drop in 1 fl oz (30 ml) of water. He usually ingests 6 drops in 1 fl oz (30 ml) of water. I would suggest to start with 1/4 MMS drop in 4 fl oz (120 ml) of water as per the Starting Procedure.

He is afraid if people try to recover from serious diseases using such low daily dosing, they won't be successful and this method will get a similar reputation as CDS and CDH have of being "weak."

It seems you Scott do need lots of water with MMS doses, but apparently most people can use much less water with their MMS only doses.

Hi CLO2,

First of all let me just say it again. I am using and suggesting this method as a maintenance protocol. The purpose of doing this maintenance protocol is to support my immune system so that I hopefully never get sick so that I do not have to do the other protocols. The last time I read Jim's maintenance protocol, he was recommending 6 drops activated and taken once a day which has the bad smell and bad taste to go along with it. For me, with the amount of water I'm drinking and the drops that I'm putting in the water, I'm getting 10 to 12 drops a day and they're spread out nice and evenly all day long AND there is absolutely no bad smell or taste. I've been doing it this way for a year now and never get sick and feel healthier than I have in many years. So again, I'm not doing this or suggesting doing this to overcome any kind of a disease. It might work to overcome disease, but that's not it's intended function.

Having said that - having read all the literature that I have read on chlorine dioxide over the last 8 years, and knowing it's amazing ability to kill both bacteria and viruses at extremely low ppm, including the great information I got from the US Patent which shows how just 1/40th of a fully activated drop of MMS given intravenously once (or maybe twice a week - I can't remember now) was able to reduce the HIV indicators in the blood of the patent's test subjects, I believe that we don't need as much MMS/Chlorine Dioxide as what many are suggesting is needed to help the body to heal. More is not always better.

When they use CLO2 to decontaminate extremely contaminated water, they just use 2ppm. It's enough to do the job. 20 or 200 ppm isn't needed. I think the fluids of our body are similar.

As you know, I've done the test that shows that 1 drop in 250ml of water added to 60ml of simulated stomach acid activates and turns the entire solution yellow in just 10 seconds. Based on this I would say that the drop is probably about 90% activated which means the solution should have about 19.35 ppm of CLO2 in it. If the entire 310ml of 19.35 ppm were to be absorbed into the blood of a person, assuming 5 liters of blood, the blood would be at about 1.2 ppm. High enough to decontaminate most water. Of course there are losses but then again, of course I've only talked about 1 single drop. Now multiply the above 10 times for 10 drops a day spread out over an entire day, going into the blood a little bit at a time.

Lastly, everyone can do whatever they want to do. I'm just sharing what I have done and learned for the benefit of everyone here and everyone in the world in the hopes that it might help at least one person sometime in the future.

May we all be well.
Scott

PS. Your 4 to 1 ratio of water to CDS is creating a teeth brushing solution of 750 ppm assuming your CDS is 3000 ppm to begin with. I prefer about 35 ppm and think it's plenty strong enough to kill all the bacteria and viruses in my mouth. At 35 ppm there is no bad taste or smell either. I have used about 150 ppm when I had an infected tooth and it worked well to stop the pain. The higher the ppm the more able it is to penetrate tissue which might be needed to reach an infection in a tooth, but at the same time I want to try to not damage the flesh on the inside of my mouth as far as possible and that's one of the reasons why, for general brushing twice a day, I keep it at around 35 ppm.