DMSO and MMS?

You certainly are entitled to your opinions.

We will continue, here, to support forum members with Jim Humble's work, and experience. When you go against that, we will remind the rest of the forum members that your opinions are simply guesses, not the work of Jim Humble.

In this instance, the "killing" or deactivating of the MMS starts at approximately 20 minutes and takes several hours - so 3 minutes or 20 seconds - does not matter - as per Jim Humble's email reply above.

Hey people, please look what I found about adding DMSO to activated MMS (before or after adding water) from ICRF!!!

They say BEFORE adding drinking water!

You can start adding drops of DMSO to the mixture (just before you drink it, meaning AFTER the chlorine dioxide is made), when you start feeling comfortable with the chlorine dioxide. Here is the protocol with DMSO:

1) You put THREE drops of MMS in a small glass bowl and then
2) Mix in THREE drops of 50% citric acid, then
3) Stir them together periodically for three minutes (this makes three drops of chlorine dioxide), then
4) ADD 6 drops of DMSO to the mixture (BEFORE adding the water),
5) Stir everything together periodically for ONE minute, then
6) Add 6 to 8 ounces (or more) of purified water, then
7) Drink the glass of water.

Note that after the DMSO is added, the mixture is only mixed for ONE minute. This last listing of 7 steps is exactly what you will do for the treatment. You will do this once an hour for twelve consecutive hours.

www.new-cancer-treatments.org/Cancer/DMSO_CD03.html


Please comment!

This is not Jim Humble's recommendation - However, you will have to make your own decision. Please know that JH's recommendation about adding AFTER the water has been added is because if you add after the water has been added, you will get the chlorine dioxide and not the various things that have not been created in the activation process.

Hi I am interested in taking MMS with DMSO. Can 5 get some advice?

PJ, are you talking about taking it internally? That would be protocol 1000+, and you can find that at www.genesis2church.is - the protocol for using it externally is protocol 3000, which you can find in the same place.

Here you are just another mixing possibility:
1. 6 (up to 15, 2-5x more) drops of DMSO
2. add 3 drops of sodium chlorite
3. add 3 drops of 50% citric acid (or 4% of HCl)
4. wait about 1 minute, add some water and use
You may better activate with 2 drops of 4% HCl + 1 drop of 50% citric acid - this works nice in many cases.
If you measure pH - it`s neutral. This way maximum of chlorine dioxide is hold by DMSO.
Can be used also in eyes, ears, nose etc.

i always make 48 drops of activated mms for the whole day dissolved in 1 litre. and then i add dmso to every single those i take during the day ( that 1 litre is for 10 hours ). But what exactly is this " activated mms " term, i mean if i add 48 drops of sodium chlorite + 48 drops of CA activator, so i must add 48 drops of DMSO ( partialy offcourse to every single dose ) during the day or it must be 48 x 2 ?. mms is just mms how can it be " activated ". mms is reduced sodium chlorite. so i am just little or at least was confused by that. So i add for every sodium chlorite drop 1 drop of DMSO regardless of the ca added to the mixture in general ... But i add dmso to already made mms diluted in water. Before i was adding DMSO to the MMS i was taking about 8-10 drops per hour through the day ( protocol 2000 ) . Now i had to reduce it to 4 drops per hour cause i dunno but it seems mms got a lot on efficienty or power cause more drops coused me diarheaous So i am noticing evidential improvement. My DMSO is " pure for analysis " whatever that means
And i am just now making another experiment with dmso because i heard that a good way of suplementing minerals and vitamins is mixing them with dmso and spraying on skin . Especially this method is effective for magnesium. I have mixed 1000mg of magnesium carbonate with 50/50 water dmso in couple of mililitres and we shall see what will happen