Is everything making sense re- MMS1 &CDS

Sodium Bicarbonate does deactivate MMS.
I have had severe nausea several times and taking it
with warm water deactivated the MMS quickly.

jbnet wrote: Sodium Bicarbonate does deactivate MMS.
I have had severe nausea several times and taking it
with warm water deactivated the MMS quickly.

this is not deactivate mms... it is disolving acid from mms.... so my conclusion after seeing my cds using SB solution does not dissolved mms1.. so i belived that after mms1 is activated then mix with SB just like mixing DMSO must be able to reduce symptom cause by acid... without using DPS as well....

Any how... i will try myself too....

I'll throw this into the mix - mostly because I can't say yea or nay on anything - but Jim Humble has stated that DMSO basically "killed" mms1 in about 20 minutes - he said it was because of it's antioxident properties. Just a thought. Obviously you will get benefits, in that DMSO is used to push MMS1 from the outer layers of skin down deep into the body, which is a good thing - it just doesn't act as long as ingested mms1 (although it may get deeper into the tissues in that 20 minutes). This was in the training seminar dvd's that I recently reviewed. Each 5 minutes the mms1 is half as strong.

Edwin3110 wrote:

jbnet wrote: Sodium Bicarbonate does deactivate MMS.
I have had severe nausea several times and taking it
with warm water deactivated the MMS quickly.

this is not deactivate mms... it is disolving acid from mms.... so my conclusion after seeing my cds using SB solution does not dissolved mms1.. so i belived that after mms1 is activated then mix with SB just like mixing DMSO must be able to reduce symptom cause by acid... without using DPS as well....

Any how... i will try myself too....

Baking Soda will neutralize the acid AND the Chlorine Dioxide!

I tried a quick experiment several days ago, which anyone can do:

Activate 6 drops or so on a small (shot/glass) and wait a minute or so for full activation.
Now drop a little pinch of Baking Soda in there (1/8 teaspoon or so, which is an overkill, but good for the test). Cover the glass!
Wait 1 minutes or so. The gas is gone and the acid is gone!
No gas smell and no more greenish/yellow color, so it pretty much neutralizes the solution.

-Karl

Steve -- And if I may retort Bill, who the heck are you to question someones knowledge, or what is and isn't relevant.
You are an MLM affiliate salesman, with a site full of copied links....what makes you such an expert? Who have you helped, where are they?

First of all STEVE -- I have over $600.00 worth of raw material in my home to make MMS1 MMS2 and the equipment to make CDS. I have Jim's books and I have been studying these products for years. I personally treated people from work and I have contacted people with serious diseases and offered my assistance for free.

In regards to the MLM/Affiliate store. I purchased all the products to sell from my home but then I seen this web page where they do all the work for you and they sell around the world so I decided to go with them (for now) as I have little time to deal with sales and shiippng. I still accomplish my goal of making MMS available to everyone that comes to my site of which I am very pleased to do. Do you have any idea how little money you get being an affiliate? To date I have made $35.00, not even enough to cover the cost of running the web site--I just wanted to be apart of this movement. Anyway I am in contact with the owners and they plan on offering even more great products so from my perspective I am doing better then if I tried this myself online. After saying that I do have product on hand for family and local people and I give that away for free.

In regards to the forum -- to many people are constantly making comments that are not related to the original questions and this is what bothers me and I am sure it bothers other as well. When I need an answer to a question or if I propose a new senerio I just want people that actually know the answer to respond. To many people think they have all the answers -- some may have all the answers but some just feel that they have to respond to every post.

This would be a better forum if we sit back and let the people with the answer respond. If no one responds within a short time then you can offer your opinion & call it just an opinion but most people are asking direct questions and not getting direct answers. For example: One person says this about sodium bicarbonate and another comes along and says something else -- it is this type of situation we need to avoid -- confusing answers to serious questions.

After saying all that anyone is allowed to comment per the forum rules but I think this is serious stuff here so it is not really like other forums -- this deals with possible life and death situations. If you give someone the incorrect advise on this forum it may come back to bite you in a real big way. Be careful what advise you pass on when dealing with people on this forum. There could be legal consequences.

I wish the moderators would designate a certain number of people with proven knowledge to respond first -- like I said this forum is different -- it is serious in nature.

Now, I still have not received an answer to my original question.

What is causing the bad taste in MMS1?

Is it the acid? I believe we can reduce the acid to about 35%.

Is it the more stable & higher content of CLO2 ? (which I believe to be true)

Why are we adding so much MMS1 to the CDS? Why not just make a 4 drop activated solution then pump that into the water then drink it right away?

In making CDS people are saturating the water with so much CLO2 that it tries to escape the solution in gas form. Yet in the MMS1 form it does not try to escape after the water is added and I am sure it travels through the body better.

I believe CDS has a place such as for IV and injections but it is not necessary for eveyday use. Again, it does have a place but we need much more information.

There are so many unanswered questions and I think it would be good to have someone with Jim and actually on his team of researchers monitor this forum and quickly respond to these concerns.

Edwin3110 -- you are an administrator and you make a comment like this one below!

this is not deactivate mms... it is disolving acid from mms.... so my conclusion after seeing my cds using SB solution does not dissolved mms1.. so i belived that after mms1 is activated then mix with SB just like mixing DMSO must be able to reduce symptom cause by acid... without using DPS as well....

Any how... i will try myself too....

Why make this statement???

People need the right answers -- especially from the forum administrators !!

Time to take this forum to a higher and more professional level.

Hi Guys, oltex here. one of the unsurmountable problems with the original MMS is that some of us are alergic to something in the solution. Me included. I am hoping that the new CDS will eliminate that problem. I will return with that result soon as I can assemble the required ite:( ms and get started with the CDS.

Hi all,
thanks for an informative thread - I think it is healthy to have the variety of contributors offering their knowledge, experiences and findings as that helps overall, moderating posts wont help.

I too, like others I know also do not handle the taste of mms1 well at all. Some are using gel caps to put mms1 into and taking those with water to help avoid the taste.

I think the main issue would be simplicity and keeping the instructions simple so that they are followed, varying the % of citric acid may just confuse some people - the 1-5 ratio initially used with mixing mms worked ok, it is simpler to just use 50% citric acid 1 drop to 1 drop mms for mixing as this is easy to remember and apply.

From Jim Humble's video on making CDS - I found very useful that the ratio of 8 times mms1 unmixed = the amount of distilled water/saline by volume to use to capture the mixed mms.

This means that smaller batches of cds can be simply made. I used 7.5ml mms(plus 7.5ml 50% citric acid) to 60ml distilled water - and that seems to work out ok - i dont have any testing items to know the ppm, but this ratio to my mind helps one to decide what size equipment to use. ie only a 20ml glass bottle for the 15ml mms1mix gassing into 60ml, that 60ml is 60 doses, and that plenty for me to keep in the fridge, it also means theres less usage of the mms product that may end up as wastage.

I concur with Jim Humble on keeping very little air space above the mms mix - both for the reasons of ensuring as much gas as possible goes through the tube, but also importantly that there does not become any substantial reservoir where the gas can sit as that is unsafe if inhaled - which could happen if it appears the gas production has stopped and the mms solution hasnt yet changed colour to neutral like jim humble shows - now i see why it takes 2 hours for his mix at least.

Bill wrote: Now, I still have not received an answer to my original question.

What is causing the bad taste in MMS1?

Is it the acid? I believe we can reduce the acid to about 35%.


I believe CDS has a place such as for IV and injections but it is not necessary for eveyday use. Again, it does have a place but we need much more information.

.

Bill;

You did not get my point in my posting here.... all i do is because you are altering it of which does not make a large difference is sense,. reducing the acid percentage will only left more unactivated sodium chlorite... that is too simple... as we know.... the real healing is in Chlorine Dioxide... too much or too less will make treatments uneffective... if you know what it means by oxidation.... I am always not trying to alter any guides given by Jim Humble because they have been working on this very long time ago.... do you think you know what you are doing..... all success will depend on it PPM per dose taken... and how frequent it should be taken... by using your new way... you have change the whole concept of its healing ppm targets... I dare to say this is because i have seen myself during the making of CDS using difference % of acid... correct acid % to activated will get full CD..... we can know by seeing the activator color left after extracting the activator gases of CD....

Again... i just find a simple solution for other who do not wishes to be so technical... every words written by me... it has its reasoning for it even with the used of Sodium Bicarbonate.... Do you see thru it? if not.... do not simply throw some hash words that hurts people... you came to learn to improved... so ask when not understanding... dont act like as you are one that knows all.... i did not even think i know all.... in short be polite in the forum.... no one is better then other.... everyone improved through knowledge..

Since you mention you have helped so many people for free.... did you help the genesis II movements to spreads? did you take up the courses yet? if you did not support any funds to Genesis II movement.... dont tell me you are treating people for free.... you should put some fund into genesis II so that we all have chance to learn even more discovery...

At the same time... did you had post any testimonial of your patient healed and how to share? since you have said that you did help lots of people for free....