Nauseous and tired only after 1/4 drop on starting procedure

Hey, thanks for the reply. That sounds like one of the more hopeful things I have heard in regard to my little dilemma. But, in the Material it says to cut back the MMS drops by 50% anytime you begin to feel any nausea, and it seems to be pretty adamant about this point. It says that a little bit of loose stool, which I haven't been experiencing, can be considered a part of the healing phase but it doesn't say anything about that in regards to nausea. Is a little bit of nausea alright? Or, is there a small amount of nausea that can the considered part of the healing process, etc? Thank you.

So, even at 1/4 drop - 3/4 drop, I still was nauseous until I started the clay. I also found if I ate something at the 1/2 hour mark or mixed my mms drop in ginger ale (I tested it and it didn’t lower the CDS concentration) that it helped with the nausea. I am in my third week still alternating with clay & mms every hour and I am up to two drops now and no nausea! So I think I probably had a lot of toxins (even though I have been working on my health for the last 6 years) I think the mms really targeted the mold, metal, and viruses in my system that nothing else could touch. I am at the point now where I am nervous to go off the clay. I also bought a mini trampoline to bounce on, hoping to help the toxins to move out of hiding so the mms & clay can get a hold of them. I did notice on the 2nd day after I bounced (10 min) that it seemed I had another mini healing crisis for about 24 hours but the mms & clay worked it out. I think you have to find ways to deal with the nausea even if you have to stay at 1/4 drop. Do you have the clay to try? 

Yes, I do have a bag of Belle Chemical brand bentonite clay that I have been saving for when I could work past the starting procedure, but I'm currently on 1/32 of a drop per hour due to nausea, with still a touch of nausea, but I'm sort of afraid to go any lower (as the HRP says to do when experiencing nausea) because that seems a bit hopeless to me, but I'm still fairly new to all this. I have CDS from Keavy's Corner on the way to me through the mail right now, as recommended by CLO2. I would like to just take your advice and get on with it, but it is contrary to some of the material, which I am reluctant to against the grain on. Has anyone else out there had success with just plowing through starting procedure nausea? To just get on with the mould protocol perhaps? Thank you so much for your reply.

P.S. This is strange because last year when I tried this I was able to get through the starting procedure and work myself up to two drops, but then nausea/tiredness set in and I kept having to cut in half until I was down to 1/16 a drop, then I became discouraged. But I am more read and diligent now. Thanks again.

I don’t think it can hurt to go right to the mold protocol with the clay. I think the fact that you are still having the nausea and/or fatigue at such a low level implies that you came in contact with some pathogen since you previously took it and I think the clay can help get you over this hurdle. I would just go right into the clay because the mold protocol doesn’t say not to go to clay after 4 days,  just discusses your dose of mms. So if you have done the 4 days of mms, regardless of the nausea/fatigue, you should be on the clay for day 5. Then alternating for the time to come. After the day 5 of clay I was able to move up in mms dose. What day of the starting protocol are you on? If it’s more than 4, you need to go to the clay not just trying to continue to lower your mms dose. Best wishes! 

I'm on day seven, still at 1/32 of a drop. Thanks for your continued correspondence. I just want to make sure I understand you clearly. Are you saying I should add in the mould protocol into the dose I'm currently taking (1/32), or just jump into the one-drop dose / beginning of the mould protocol? Thanks so much again.

Ok, my apologies. I've just re-reviewed the mould protocol and it looks like I was not concrete on a thing or two. It is day eight and I am just now begining the mould protocol. Thank you.

I’m glad to hear you are comfortable starting the mold protocol now. I hope I didn’t come across as too direct. I just know how much improvement I had after starting the clay, and if I wouldn’t have I probably would have given up on the mms right away! I hope it helps. Please, keep us posted! 

wrote:

I’m glad to hear you are comfortable starting the mold protocol now. I hope I didn’t come across as too direct. I just know how much improvement I had after starting the clay, and if I wouldn’t have I probably would have given up on the mms right away! I hope it helps. Please, keep us posted! 
 

What was the brand of the clay tablets you used? any recommendations?

I bought a bag of Belle Chemical brand food grade bentonite clay and took it for a week.
 

I used this one in the link below that I purchased from eBay. I put it into capsules myself. 
www.ebay.com/itm/Bentonite-Montmorillonite-Calcium-Aztec-Indian-Healing-Clay-Powder-100-Pure-/163760575548?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0