TOPIC:

Hi everyone.

Injecting CDH into a vein to try to cure a disease obviously can be scary, especially without knowing that others have done it before and it's been okay and even beneficial. So that's the reason why I'm posting this - so you all know that it HAS been done before and appears to be not only safe if done properly, but also extremely effective.

In light of the antibiotic resistant strains of bacterias which are emerging and the constant threat of deadly and debilitating viruses, it seems prudent that I pass along the following information regarding the safe intravenous use of dilute CDH to cure disease. Who knows, it may save your life someday or the life of someone you know.

Following are 2 separate cases of people injecting dilute CDH to cure themselves of blood-born bacterial infections.

In one case the person did the injection 1 time a day for a few days but after just the first 10 cc injection in the late evening (which was 87.5 ppm), by the following morning the infection was already beginning to decrease and the subsequent injections (of various experimental ppm concentrations) during the next few days appeared to play a huge role in the stopping of the infection.

In the second case where the infection of the blood and the sepsis was so bad that the doctor said it was a miracle the patient was still alive, again, by the following day after the first injection, the patient began showing signs of recovery. In this case the patient received one 12 cc injection of 100 ppm CDH on the first day in the evening and then on the following day he received two 12 cc injections. Then on days 3, 4, 5, 6 and 7 the patient received from three to four 12 cc injections of 100 ppm CDH and each and every day improvement was seen in the patient. On day 7 the patient asked to be discharged from the hospital on the following day, since in his opinion he was well enough to leave even though he was still showing some signs of sepsis on day 7, including bloating of the abdomen.

It should be noted that in the first case mentioned above, other ppm concentrations were tried and vein quality at the injection site appeared to be a major factor in whether or not the concentration seemed to be too high or not. At 87.5 ppm there were no feelings of pain when the CDH was injected. At 150 ppm there was again no burning sensation and the patient even stated that the CDH actually felt cool going in. At 175 ppm though, the patient said he felt a burning sensation but that he thought that the vein quality at the site was not good at the time. And at 350 ppm, again there was a burning sensation but the vein at the site may not have been good at that time either. Based on what was reported, that at 150 ppm the CDH felt cool going in but at 175 ppm on a separate occasion, a burning sensation was felt, this may have just been due to poor vein quality at the time at the injection site.

By the way, all of the injections mentioned above for both cases were done via an IV Push and at a rate of about 1 cc each 10 seconds, which is actually fairly fast. In an ideal situation, an administration rate of 1 cc every 1 to 2 minutes would assuredly prove to be much easier on the vein and even the higher concentration of 350 ppm might prove to be acceptable, however 100 ppm would seem to be a very reasonable concentration in any case, especially since in both of the cases mentioned above, the infection was defeated.

It also should be noted that in both cases mentioned above, there didn't appear to be any negative side effects from the injection of the CDH solution with the exception of the burning sensation mentioned, however this was not a clinical trial where blood tests were taken before and after to determine degradation of the blood in any way.

Lastly, it needs to also be pointed out that every effort was made to make sure that the CDH created was made from the highest quality ingredients available including 4% pharmaceutical grade HCl or better, reverse osmosis water which was also distilled and the sodium chlorite was also the purest available. The bottle that the full strength CDH was made in was also sterilized prior to using it and then the final dilute solution was put into another sterilized bottle. In addition sterile syringes were used to extract the dilute CDH solution prior to injection. So in other words, every precaution was taken to make sure the CDH to be injected was as clean as possible.

Since the original McRae/Lackney method for making the CDH was used, the original base solution that was made should have been approximately 3500 ppm. Using 3500 ppm as the assumed base concentration made it easy to determine how much water to add to the it to end up with any given concentration desired based on the use of the following dilution calculator:

www.endmemo.com/bio/dilution.php

(After going to the above link, use the last dilution calculator at the bottom of the ones shown)

I hope this helps in some way. If you have any questions please let me know.

May you all be happy & well.

All the best,

Scott McRae

Hi everyone,

Just want to share that this has been done a few times now in various ways. For example putting 0.75ml of CDH @ 3500ppm (CDS would probably work too) into 500ml of IV solution will produce 500ml of 5.25ppm and feels like nothing going in. Note that 0.75ml of CDH only contains 3/4 of 1 drop of both the sodium chlorite (MMS) and 4% HCl. This small amount can save your life.

May we all be well,
--Scott

50% Death Rate!
The method described earlier in this posting should be able to defeat the types of bacteria mentioned in this news release.

<iframe width="560" height="315" src="" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen>

Prepare now in case this ever comes to you or someone you know. Later may be too late.

Be safe,
Scott

I'd suggest that everyone learns how to make CDH or CDS and then make some to keep on hand "just in case".

Take care,
Scott

The reason why CLO2 (Chlorine Dioxide) can help your body to become well from these "Nightmare Bacteria" is because of it's small size and method of deactivation which is via Oxidation. The following PDF will give you some idea of how and why CLO2 works and also implies why, at low ppm concentrations, CLO2 can work it's magic to kill the bacteria without damaging your body at the same time. As you'll see, size definitely does matter.



Take care and be prepared,
Scott

Check out this post I did previously which contains a patent for use of CLO2 intravenously to cure HIV:

TOPIC: HIV: How Much IV CLO2 It Takes To Cure HIV (and possibly Ebola, Zika, Dengue, etc.)

g2cforum.org/index.php/list/hiv-aids/30007-hiv-how-much-iv-clo2-it-takes-to-cure-hiv-and-possibly-ebola-zika-dengue-etc

Take care and be prepared,
Scott

Thanks for sharing.
Very interesting and very interested. The problem I see is not too many people know how to self administer IV injections. What do you do in this case? Is there a kit or something that one can use?

Good question Gabyher - it made me do a little research which I'll put below.

Basically YouTube and Amazon have all the answers and here are the links below

Amazon IV Kits (many to choose from)
www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=iv+kit

Amazon Sterile 0.9% Saline Solution (I couldn't find bags or bottles for an actual IV - probably because they're considered pharmaceutical items - Here in Indonesia there are lots of medical supply stores that sell the IV solution in the bags/bottles):
www.amazon.com/Sterile-Irrigation-Saline-Sodium-Chloride/dp/B078Z57XC9/ref=sr_1_3?ie=UTF8&qid=1523107046&sr=8-3&keywords=sodium+chloride+0.9+1000ml

YouTube video showing you how to make homemade sterile 0.9% IV solution:


Amazon Kangaroo Gravity Bag to put the above 0.9% saline solution in (you should sterilize it before using though)
www.amazon.com/KangarooGravity-Feeding-Large-Bore-1000mL/dp/B00T5AFVDW/ref=sr_1_13?ie=UTF8&qid=1523107651&sr=8-13&keywords=iv+kit

YouTube video showing you how to put medicine (CDH or CDS) into the IV bottle:


YouTube video showing you how to start an IV after you have all of the above (This is the funnest video I could find but there are many others if you want something more professional):


So that's what I found (and there are many more). If you don't have access to Amazon in your country you may have something similar to Amazon. Here in Indonesia we have Tokopedia. Another option in Indonesia, as I mentioned above, is that we have lots of little medical supply stores that carry all of the above medical supplies and maybe the same is true in your country.

Hope this will be of help to someone out there.

Take care and be prepared,
Scott

I'm putting this up again because the PDF in the link above about the size of CLO2 in comparison with other things, such as a Hydrogen atom, is broken. So here it is again:

The reason why CLO2 (Chlorine Dioxide) can help your body to become well from these "Nightmare Bacteria" is because of it's small size and method of deactivation which is via Oxidation. The following PDF will give you some idea of how and why CLO2 works and also implies why, at low ppm concentrations, CLO2 can work it's magic to kill the bacteria without damaging your body at the same time. As you'll see, size definitely does matter.



Take care,
Scott