- Posts: 4593
- Thank you received: 3705
Confusion on measuring ppm in making CDS
- pam
-
- Offline
- Platinum Boarder
-
Less
More
25 Jan 2012 21:27 #10934
by pam
Replied by pam on topic Confusion on measuring ppm in making CDS
At this point, we have a number of people on the forum who are making their own CDS - they need accurate information so that they can make accurate assessment of the CDS strength that they have.
Please Log in or Create an account to join the conversation.
- debibrown
-
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
05 Feb 2013 17:42 #30223
by debibrown
Replied by debibrown on topic Confusion on measuring ppm in making CDS
Hi John. I have tried this way and it took me forever and still did not get to 300 ppm on the stick using this method of 1ml to 9 ml of water and adding the 0 to make 3,000 ppm. I asked the church and they told me to put the stick right into the liter bottle of CDS i was making and measure it that way. This is why everyone is confused. Jim never has talked about doing it this way but tells us to use the 0-500 ppm sticks. So who is correct. I only got to 200 or 250 ppm of solution of CDS. I continued to use more mms activated and blew harder and harder into the liter bottle to see if i could get the CDS stronger but was not able too. So i just measured it from the liter i was making and it measured 300ppm so i left it at that. It was pretty yellow in color. What do you think. Can anyone answer this question? I have been doing the mms because of this problem. YUK! I can take so much more of the CDS 3 ml at a time (3 doses of mms) I have HepC and have not been able to get rid of it after being on the mms for over 1 year.
Please Log in or Create an account to join the conversation.
- debibrown
-
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
05 Feb 2013 17:43 #30224
by debibrown
Replied by debibrown on topic Confusion on measuring ppm in making CDS
Hi Pam. Why does John D say banned under his name. Is he banned from the site or does that mean something else?
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3705
05 Feb 2013 21:36 #30238
by pam
Replied by pam on topic Confusion on measuring ppm in making CDS
Yes, he is banned from this site. If you would like to contact him, you will need to contact him through his company.
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3705
05 Feb 2013 21:43 #30240
by pam
Replied by pam on topic Confusion on measuring ppm in making CDS
What strength CDS are you trying to make? You can find a nice series of charts at
www.mmsinfo.org/
under the "shot glass method" which is a very easy technique.
Are you making a daily bottle? Or are you trying to make a dosing bottle? (where you pull out x amount to make a daily dose)-?
You can still use your 300ppm/L, you just need more of it to make a dose.
Are you making a daily bottle? Or are you trying to make a dosing bottle? (where you pull out x amount to make a daily dose)-?
You can still use your 300ppm/L, you just need more of it to make a dose.
Please Log in or Create an account to join the conversation.
- debibrown
-
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
24 Feb 2013 00:32 #30919
by debibrown
Replied by debibrown on topic Confusion on measuring ppm in making CDS
Hi Pam, just to clarify the making of 50% citric acid solution. 1:1 ratio? Does that mean 1 tsp of salt to 1 tsp of distilled or clean water? Debi Brown
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3705
24 Feb 2013 01:44 #30920
by pam
Replied by pam on topic Confusion on measuring ppm in making CDS
Yes, Debi - only, pack down the citric acid. (like you would brown sugar)
The following user(s) said Thank You: debibrown
Please Log in or Create an account to join the conversation.
- paulbaldy
-
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
26 Feb 2013 23:49 #31084
by paulbaldy
Replied by paulbaldy on topic Confusion on measuring ppm in making CDS
Hi pam , have tried several times to access
www.mmsinfo.org/
shot glass method . eventually got there today and each time i try my browser crashes , something about maliscious add on ? Just updated my Adobe and same thing happened ? Is problem on my browser ? Thanks
Please Log in or Create an account to join the conversation.
- pam
-
- Offline
- Platinum Boarder
-
Less
More
- Posts: 4593
- Thank you received: 3705
27 Feb 2013 16:05 #31099
by pam
Replied by pam on topic Confusion on measuring ppm in making CDS
Guessing it's a problem with your browser. I can get there fine, running chrome, malwarebytes, and Avast - paid versions of the last 2. What happens for me is that it automatically sets up a download for the file, which is an adobe acrobat file.
The tech admin on that site is VERY savvy, so I doubt there would be a malicious add-on.
The tech admin on that site is VERY savvy, so I doubt there would be a malicious add-on.
Please Log in or Create an account to join the conversation.
- Serge
-
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
18 Apr 2013 08:07 #32621
by Serge
Replied by Serge on topic Confusion on measuring ppm in making CDS
Hi Pam
I'm confused too about the wide range of xxxppm or mg. But the teststripes of LaMotte says clear that black is 500ppm and if it is more than 500ppm it will turn to gold/black or to gold colour, so I gess that black is really 500ppm.
I'm confused too about the wide range of xxxppm or mg. But the teststripes of LaMotte says clear that black is 500ppm and if it is more than 500ppm it will turn to gold/black or to gold colour, so I gess that black is really 500ppm.
Please Log in or Create an account to join the conversation.
Time to create page: 0.315 seconds