How to Make 1 1/2 Drops of MMS1

I have been taking 1 drop of MMS1 for 5 days now on the Starting Procedure.  Today, I decided I would go up to 1 1/2 drops.

So I activated 2 drops and added 1 cup of water.  Then I discarded 1/4 cup of water.  Would this give me 1 1/2 drops?

Or do I mix 2 drops with 1/2 cup of water and toss out 1/4 of this?  There is so much math involved in doing this.

I looked in HRG, but I couldn’t find instructions for 1 and 1/2 drops, only 1/2 drop.

Oh my God  I went down the rabbit hole too!!
2 drops needs 240 ml water 
to make 1.5 drops you need 180 ml water

discarding 1/4 of 240 ml =  60 ml 
240-60 = 180 ml 

maybe someone else could verify?!!

I had to do conversion because you told me in metric. It looks to be the same conversion, but I’m still wondering if this is correct. I didn’t notice any ill results.

I was reading through the PDF of the Health Recovery Guide and it seems that to make 1 1/2 drops you need two glasses.  In one glass you activate 1 drop and in the second glass you also activate 1 drop, but you only add 2 oz of water for this second glass.  This is what I was thinking after reading the PDF below:

I was reading HRG of 2016 p. 85, third paragraph and it mentions activating the maximum of 3 drops in 4 oz of water!  So if I were activating 2 drops in 1 cup of water, that would be like just drinking double the amount of water with 2 drops.  I wish someone who knows on this forum would help out.  

If I’m still drinking 2 drops, it probably doesn’t matter how much water I drink with it.  

I just had another idea!   If I activate 3 drops in 4 oz (1/2 cup) of water and I pour off half of that, it would give me 1 1/2 drops.  This stuff isn’t easy for me.    I would appreciate someone confirming this.

If you mix 2 drops with 1/2 or 1 cup and toss a 1/4 out you have 1 1/2 drops left. It doesn't matter the amount of water you mix with the 2 drops. Throw a quarter out and you have 1 1/2 drops left

wouldn't the amount of water change the mms1 strength?

It will change the percentage of dilution (taste) but will still contain 1 1/2 drops of CL02. 

When following the MMS1 starting procedure, it is not necessary to make "fresh" hourly doses. 

Much simpler to make an all-day bottle of MMS1 and dose 1/8 of the bottle hourly for 8 hours. 

To get 1.5 drops of MMS1 hourly for 8 hourly doses, you would add a 12 drop dose of MMS1 to the all-day bottle. 

Read page three in the attached PDF file. 

Speaking about "drops", the standard we use is 20 drops per ml of solution. That makes each drop 0.05ml in volume. 

I have found that drop size can vary by 100% from different droppers.   

What is the size of your drops?