How Do You Mix Together Topical MMS Spray?

Hi, Bruce, I've had yellow MMS that no longer smelled and no longer seemed to have the same effect in my skin spray over time (even without the DMSO) - but it was still colored. I was wondering, did you check with testing strips? Please don't take this as a personal affront - it's not meant that way at all - I'm just wondering if there's a way for both you and Jim to be right and, as i said, I've emailed Jim Humble with the same question - That said, I know there have been times when JH has said something will last a week in the fridge, and it's lasted a lot longer than that.

Does it matter if you put the MMS Spray Solution in a plastic or glass bottle?

Not that I know of, Ponce. I have it in glass upstairs in the bathroom cabinet, and in plastic downstairs in the fridge. Both are colored, to protect it from the light - seems to last quite a while.

Thank you Pam... You are so very helpful!

Can DMSO 70/30 be used in a glass spray bottle without it affecting the plastic of the spray tube inside the bottle?

Hi, Ponce. Glass is inert but breakable; Polyethylene seems to be ok; Others have reported reactions with the plastic nipples on bubbler stones which I expect are polystyrene . ( Mine were) Keep in mind that mms is an oxidizer, any metal will corrode/rust and neutralize the sol'n. With plastic bottles, many of the lids are styrene. The really hard black caps are phenolic and seem to be ok, but are so hard that they usually have a cardboard disc for sealing. I've successfuly replaced the cardboard disc with silicone rubber which seals well but being soft, can be easily destroyed by overtightening.

Thank you Paul...

Will this mixture of 10 drops of activated MMS per 1 oz. of water be good for a topical spray for a child with foot and mouth?
Any help would be appreciated.
Thanks,
Della

Delia - yes, but you could also do the bath and footbath protocols.
Taken directly from JH's most recent book, which you can find at www.jimhumble.biz

[quote An MMS Bath
The skin is the body’s biggest organ and can absorb MMS easily. Run a hot bath and add anywhere from 5 to 20 drops of activated MMS. If the water is not filtered, run it hot and let the vapor rise for a few minutes. Stay in the bath for about 10 minutes. Depending on your tolerance for MMS dosages, you could go up to about 40 drops.
Don’t be concerned about the tub of water diluting the MMS a lot. Whatever number of drops you put in the water will come in contact with your skin regardless of how full the tub is or how large it is.
 An MMS Footbath
If you have a toenail fungus or any sort of foot wound or infection, fill a footbath with hot water and add 10 to 20 drops of activated MMS. Soak your feet for 5 to 10 minutes.
Repeat this daily until the condition is healed. It could take one week, or up to 6 weeks, depending on what the problem is. Some people have reported good pain relief for gout using this procedure.
Also, this is a good way to just get more MMS into the body for supplementing the Protocols 1000, 2000, and 3000.[/quote]

Thank you Pam.
I appreciate your response. I assume it would be the same with CDS, when I get some made or bought.
I didn't think about the bath also. Good reminder.

Much appreciated,
Della