TOPIC:

Hi all,
thanks for an informative thread - I think it is healthy to have the variety of contributors offering their knowledge, experiences and findings as that helps overall, moderating posts wont help.

I too, like others I know also do not handle the taste of mms1 well at all. Some are using gel caps to put mms1 into and taking those with water to help avoid the taste.

I think the main issue would be simplicity and keeping the instructions simple so that they are followed, varying the % of citric acid may just confuse some people - the 1-5 ratio initially used with mixing mms worked ok, it is simpler to just use 50% citric acid 1 drop to 1 drop mms for mixing as this is easy to remember and apply.

From Jim Humble's video on making CDS - I found very useful that the ratio of 8 times mms1 unmixed = the amount of distilled water/saline by volume to use to capture the mixed mms.

This means that smaller batches of cds can be simply made. I used 7.5ml mms(plus 7.5ml 50% citric acid) to 60ml distilled water - and that seems to work out ok - i dont have any testing items to know the ppm, but this ratio to my mind helps one to decide what size equipment to use. ie only a 20ml glass bottle for the 15ml mms1mix gassing into 60ml, that 60ml is 60 doses, and that plenty for me to keep in the fridge, it also means theres less usage of the mms product that may end up as wastage.

I concur with Jim Humble on keeping very little air space above the mms mix - both for the reasons of ensuring as much gas as possible goes through the tube, but also importantly that there does not become any substantial reservoir where the gas can sit as that is unsafe if inhaled - which could happen if it appears the gas production has stopped and the mms solution hasnt yet changed colour to neutral like jim humble shows - now i see why it takes 2 hours for his mix at least.

Bill wrote:

Now, I still have not received an answer to my original question.

What is causing the bad taste in MMS1?

Is it the acid? I believe we can reduce the acid to about 35%.


I believe CDS has a place such as for IV and injections but it is not necessary for eveyday use. Again, it does have a place but we need much more information.

.

Bill;

You did not get my point in my posting here.... all i do is because you are altering it of which does not make a large difference is sense,. reducing the acid percentage will only left more unactivated sodium chlorite... that is too simple... as we know.... the real healing is in Chlorine Dioxide... too much or too less will make treatments uneffective... if you know what it means by oxidation.... I am always not trying to alter any guides given by Jim Humble because they have been working on this very long time ago.... do you think you know what you are doing..... all success will depend on it PPM per dose taken... and how frequent it should be taken... by using your new way... you have change the whole concept of its healing ppm targets... I dare to say this is because i have seen myself during the making of CDS using difference % of acid... correct acid % to activated will get full CD..... we can know by seeing the activator color left after extracting the activator gases of CD....

Again... i just find a simple solution for other who do not wishes to be so technical... every words written by me... it has its reasoning for it even with the used of Sodium Bicarbonate.... Do you see thru it? if not.... do not simply throw some hash words that hurts people... you came to learn to improved... so ask when not understanding... dont act like as you are one that knows all.... i did not even think i know all.... in short be polite in the forum.... no one is better then other.... everyone improved through knowledge..

Since you mention you have helped so many people for free.... did you help the genesis II movements to spreads? did you take up the courses yet? if you did not support any funds to Genesis II movement.... dont tell me you are treating people for free.... you should put some fund into genesis II so that we all have chance to learn even more discovery...

At the same time... did you had post any testimonial of your patient healed and how to share? since you have said that you did help lots of people for free....

Bill wrote:

Edwin3110 -- you are an administrator and you make a comment like this one below!

this is not deactivate mms... it is disolving acid from mms.... so my conclusion after seeing my cds using SB solution does not dissolved mms1.. so i belived that after mms1 is activated then mix with SB just like mixing DMSO must be able to reduce symptom cause by acid... without using DPS as well....

Any how... i will try myself too....

Why make this statement???

People need the right answers -- especially from the forum administrators !!

Time to take this forum to a higher and more professional level.

Bill;

If you are not this field professional.... dont ever said people are unprofessional.... what status are qualifying you to quote that way? I have done lot of research that you dont even know how far i have gone through.... so please simply ask why someone post something you are not understood may help many to learn here instead the way like you behave is too bad an image to say that you are a kind of person who safe live.... i am doubts about it......

The second things i call think on you if you are not stupid or unhealthy mental types of person.... then you may be a mole from big pharmaceutical pretending somebody here to watch for some possible right mixture and tried to prevent it using some kind of way to discredit it.....

You show disrespect to us in this forum for what reasons? and then why you want to be here to learn or read.......

The reason i need to write this way so that i hope you can open your eyes better so that i wish you could improved your attitude here to help yourself and to help other.... Simply Ask for UNDERSTANDING... is that hard?

Re: Is everything making sence re- MMS1 &CDS

yes piece by piece.

Today i was mixing some cds into a glass of water and i noticed very quickly that the ambient air temperature causes the gas to evaporate/escape out of the solution.

How to get around that for me is to : use chilled water - fill glass first, and by keeping the cds solution in the fridge i take the required dropper full and mix it wit the water - then no/minimal losses occur