TOPIC:

seals in Jar for Shot Glass method 03 Nov 2012 01:00 #25896

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	Vector. I would suggest you pm Charlotte direcly. His findings have ben in oppostiontto what karl suggests, but Charotte's findingw are based on testing strip verification
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 03 Nov 2012 01:32 #25898

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	OK...I sent the message. Hopefully she can explain this whole thing to me. I just can not grasp the PPM readings. I think there is a low wattage bulb on...flickering in the basement...and hopefully she can provide enough power for the full light to come on.
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 03 Nov 2012 02:13 #25900

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

The weight is understandable. One would think the Sodium Chlorite & Citric Acid flakes mixed with 1 fl oz water would provide a much stronger CDS solution. I think I need to get the PPM "thing" figured out and run some test as I have enough(famous last words) material to conduct a few experiments. My rookie status is in full view...

SO...if a solution of about 8000ppm were needed, and using the "3 min CDS" method...use 3 separate 1 TSP doses of SC & CA into the same 300ml receiver...is this more or less correct.

Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 03 Nov 2012 12:46 #25911

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	Fact are stubborn things and hard to dispute. Of the two methods(liquid vs. flakes) do you prefer? On my PM...am I on the right track with my PPM thoughts?
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 04 Nov 2012 12:29 #25931

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	I need to go back and review the charts again and this: genesis2forum.org/index.php/list/mms-research/10312-how-to-use-dilution-calculator-to-correct-your-cds-to-3000-ppm I think I am making this far more complicated than it is. The following user(s) said Thank You: CLO2
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 04 Nov 2012 19:17 #25944

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	Would not surprise me. The shot glass method is really the simplest of any of them.
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 05 Nov 2012 02:23 #25956

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	I have gotten it into my mind that the finished CDS product must be diluted....because the sample must be diluted to obtain the PPM. The only reason you would dilute the CDS solution is to decrease the PPM...IS THIS CORRECT? The charts provided are for the shot glass method. I have already purchased the pump/tubing, will these charts work with a forced air system?
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 05 Nov 2012 16:04 #25969

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

OK....I think the PPM is clear in my mind(famous last words). I shall review the videos and documentation to see the amount of Sodium Chlorite/Citric Acid used...in what form...which method...for which concentration. I know the variables determine the outcome, but it would be so sweet if determining factors were in a central location(ie. Use of Sacraments)for access.

Thank you very much for your patience and help with this.

Please Log in or Create an account to join the conversation.

Page:
1
2

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

seals in Jar for Shot Glass method

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.