Welcome, Guest

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

Alternate method of producing CDS

Page:
1
2
3
4

TOPIC:

Alternate method of producing CDS 23 May 2012 15:36 #17594

rsb.mms
Topic Author
Offline
New Member
Posts: 6
Thank you received: 14

Hi
I would like to tell you how I have been producing CDS which may be easier than the current methods.

You will need:
1. MMS
2. A plastic water bottle.
3. A plastic syringe that will fit inside the water bottle. Cut the little arms off if necessary. A needle is not required.
4. A glass to prepare the MMS.

Start by filling the plastic bottle with water.

Activate 10 drops of MMS in the glass.

Suck the mixture into the syringe leaving only a small amount of air in the syringe.

Drop the syringe into the plastic bottle. Make sure the hole is up. (important)
If the syringe is facing down then the gas generated will push the MMS out into the bottle which is not what you want.

Screw the cap onto the bottle.

As the gas is generated it will come out of the syringe and dissolve in the water. This takes a couple of hours but I usually leave it over night. The rest of the MMS will remain in the syringe.

This method is a no loss and no wastage system.

Give it a try
Roy Brooks

The following user(s) said Thank You: mariannhvw, Moyra T, jbnet, Alan_SP, Jason, fourfingerz, Sky, rsbackus, KennethWalter

Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 15:51 #17595

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3703	Wow - interesting! How do you get the syringe out of the bottle afterwards? What size plastic water bottle are you using? What size syringe? Thanks for sharing your experience. The following user(s) said Thank You: jbnet
	Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 15:53 #17596

kevink Offline Premium Member Posts: 111 Thank you received: 140	Hi Roy - that does sound great and I have 1 more question to add to Pam's - have you tested the ppm you get from this method? The following user(s) said Thank You: jbnet
	Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 17:09 #17599

rsb.mms
Topic Author
Offline
New Member
Posts: 6
Thank you received: 14

Hi Pam

I either leave it in the bottle until finished or tip the CDS into another another water bottle.
I have been using a 1 cc syringe which will hold 10 drops of activated MMS but any syringe will do
as long as it fits inside your water bottle.

I usually use a 500mL bottle but I have used a small 300mL bottle and also larger 1L water bottle.
Any soft drink bottle can be used as long as it has a screw on lid.
I dont believe the size of the bottle makes any difference. If the syringe contains 10 drops of activated MMS
then if you want to consume the equivilent of 3 drops of MMS then drink 3/10ths of the bottle.

I have not measured the concentration in the bottle.

Hope this helps

Roy

The following user(s) said Thank You: jbnet

Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 18:28 #17600

pam
Offline
Platinum Boarder
Posts: 4593
Thank you received: 3703

You may want to look at Jim's latest video for making CDS (blowing into the bottle) - and you may want to play with testing strips - not that it's the end of the world if you don't - BUT, 10 drops activated MMS puts off less CDS when used as MMS1 than 10 drops activated MMS when it's made into CDS.

The reason is that there are other things that are in MMS1 - such as hypochlorous acid, chlorite ions, some unactivated sodium chlorite - (these are not good or bad things in themselves, but they do affect the amount of chlorine dioxide in the "dose" -

So, you may be able to use even less MMS and CA in your syringe and achieve a full dose...

(This post reminds me of the early days with CDS when we were all excited and working on different ways to make it and check for dosing, etc. It's fun!{

The following user(s) said Thank You: jbnet, Rainbow Fighter

Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 18:57 #17601

jbnet Offline Premium Member Posts: 127 Thank you received: 72	It certainly seems like something exciting and very, very simple to do. Anxiously waiting for some results from what Pam is suggesting and of course any other input.
	Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 19:24 #17602

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3703	Well, this technique without testing is not going to be "bad" - I've known people who have taken much more than this in CDS over the course of a day - so if you end up with a little extra over the 3 drops, even 6 drops equivalent, etc., then you're definitely fine! Another one for me to play with, LOL, just as soon as I get a free moment!
	Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 23 May 2012 22:35 #17604

jbnet Offline Premium Member Posts: 127 Thank you received: 72	How much water do put in the bottle using the 10 drop mms?
	Please Log in or Create an account to join the conversation.

Re: Alternate method of producing CDS 24 May 2012 03:54 #17618

CLO2 Offline Administrator Posts: 5628 Thank you received: 4456	edit
	Please Log in or Create an account to join the conversation. Last edit: by CLO2.

Page:
1
2
3
4

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

Alternate method of producing CDS

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.