TOPIC:

CDS Test strips 09 May 2012 17:03 #17031

leebanjo
Topic Author
Offline
New Member
Posts: 2
Thank you received: 2

I can make CLS ok, but I dont know how to measure the concentration. Using the LaMotte test strips High Range, 0-500, Jim says to get between 25 and 50 to make a solution to drink. But what concentration is that in ppm? Pam says 1 ml of 3000 ppm = 3 drops MMS. But what test strip reading equals 3000 ppm?

• How to support the Genesis II Church and MMS at no cost
• Upcoming MMS Training seminars
• MMS Newsletter and archive
• MMS Home Training course
• [url=http://g2cforum.org/index.php/list/general-discussion/26892-mms-training-material-essential-books-and-video-cou

Please Log in or Create an account to join the conversation.

Re: CDS Test strips 09 May 2012 17:29 #17032

paul Offline Platinum Member Posts: 618 Thank you received: 670	Welcome Lee. Take a small sample of the CDS you have made, and dilute it with distilled water 10:1. That should put it in the 0 - 500 range of the test strips.
	Please Log in or Create an account to join the conversation.

Re: CDS Test strips 10 May 2012 04:54 #17055

John D. Visitor	so when pam says 3000 on your test strip you just go by 300. 300 means 3000, 400 means 4000, 500 means 5000 and beyond that you wont know unless you use different dilution. However to do the regular dilution like paul says dilute your water 10 to 1.
	Please Log in or Create an account to join the conversation.

Re: CDS Test strips 10 May 2012 11:25 #17063

leebanjo
Topic Author
Offline
New Member
Posts: 2
Thank you received: 2

Thanks , Paul and John. One more question: using the test strip color chart 0-500. What do I have when the strip color matches 100. I have one batch that color and one darker, between 250-500 color match. So I can't distinguish between 300, 400 etc. Diluting by 10 makes sense using paul's method.
thanks a bunch

Please Log in or Create an account to join the conversation.

Re: CDS Test strips 10 May 2012 14:03 #17068

pam Offline Platinum Boarder Posts: 4593 Thank you received: 3702	And when you dilute to 10%, it's 1 part CDS, 9 parts water. Good luck! The following user(s) said Thank You: leebanjo
	Please Log in or Create an account to join the conversation.

Page:
1

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

CDS Test strips

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.