Welcome, Guest
Username: Password: Remember me
### Research Section Disclaimer

None of the products, protocols or methods here have been approved by Jim Humble. This is the research forum and was set up for those wanting to discuss and experiment with MMS, and new complimentary technologies. Any experimentation that you personally do is at your own risk. Before anything is submitted for approval it must be first approved by Jim Humble in writing and posted under his account. The main source for approved material, protocols etc, is in Jim Humble's latest book at www.jhbooks.org Each person using this Forum is considered to be completely responsible for themselves and their own personal health. Any experimentation that you personally do is at your own risk.
  • Page:
  • 1

TOPIC:

MMS2 used to make mms3? 18 Dec 2014 15:25 #48514

  • rmercer
  • rmercer's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 27
  • Thank you received: 7
Can mms2 and mms1 be combined into mms3? Is there anywhere online where this is explained?

Please Log in or Create an account to join the conversation.

MMS2 used to make mms3? 18 Dec 2014 15:51 #48515

  • Horsefeathers
  • Horsefeathers's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 491
  • Thank you received: 321
If I remember correctly someone accidently did and got very sick.

Please Log in or Create an account to join the conversation.

MMS2 used to make mms3? 18 Dec 2014 16:20 #48516

  • fourfingerz
  • fourfingerz's Avatar
  • Offline
  • Moderator
  • Moderator
  • I'm rooting for you - we're all in this together
  • Posts: 544
  • Thank you received: 558

Can mms2 and mms1 be combined into mms3? Is there anywhere online where this is explained?


Jim does introduce it in his last book (2011), but I have not heard him speak of it again.


"MMS3
MS3 becomes obvious if you think about it for a minute.
MMS3 is created when you combine the original MMS (now
called MMS 1) with MMS 2. I did combine them and began
taking them as well. I was pretty safe about it. I took one tenth of a
drop and then increased it as I found that it was not causing nausea.
Eventually I and several of my friends were able to overcome the flu
taking MMS3.

I believe that MMS3 is even more effective than either MMS 1 or MMS
2. I only list this research here so it is in book form, in thousands of
books that is, and thus if something happened to me it would still be
known. The reason is that both of these minerals are chemicals that
the body can make naturally. They each do a slightly different job.
They are both oxidizers, though with different oxidation potentials.
So one would assume that the two working together could be more
effective than just one of them working alone.
How I made MMS3
I obtained a bag of pool chlorine; that’s calcium hypochlorite. The
bag was two pounds and it was 70% calcium hypochlorite. That is
the only chemical that works.
• Don’t use any other pool chlorine. Don’t, absolutely don’t
use sodium hypochlorite.
However, you can use a different percentage than 70% but I wouldn’t
recommend using a pool chlorine less than 65% calcium hypochlo-
rite. Why not? The reason they have less calcium hypochlorite is that
they include some chemicals as stabilizers and clarifiers. But in an
emergency, you could use a calcium hypochlorite of a percentage as
low as 45%. If the disease is there, don’t hesitate. Pool chemicals are
not poisonous. The skin will absorb more poison than the stomach,
so if pool chemicals were poisonous, swimmers would be dying.
So use a pool chlorine that is at least 65% if possible.

Step 1: I obtained a one-ounce empty dark bottle with an eye
dropper lid.

Step 2: I filled it with MMS (now known as MMS1).

Step 3: For my MMS2 measuring device, I used a size “0” capsule
filled to the top with calcium hypochlorite.

Step 4: The calcium hypochlorite from the capsule I dumped into
a saucer and used a spoon to grind the granules into fine powder.
This is necessary in order to get it to dissolve in a reasonable length
of time.

Step 5: I dumped the finely ground powder into the one-ounce bottle
of MMS and shook it to dissolve it. It never completely dissolves, as
the solution quickly becomes saturated, but the un-dissolved white
powder in the bottom is something that you use.

• This solution only lasts about 5 days and it is not yet MMS3.
How to Make a Capsule Containing 6 Drops
of MMS3 (or Less)

First obtain a wine glass with a dimple in the bottom as already
mentioned in “How to Use Gel Capsules” in Chapter 12. Use a size
“0” capsule or larger if you wish.
1) Shake the bottle containing the MMS1 with dissolved and
un-dissolved calcium hypochlorite until the white particles on
the bottom are all up moving around in the solution. When
you suck some of the liquid from the bottle up into an eye
dropper, some white particles will come with it. They will
dissolve, giving you hypochlorous acid.
2) Now put six drops of this solution with white particles into the
dimple of the wine glass.
3) Drop 6 drops of 50% citric acid into the same dimple. It will
quickly turn brownish yellow. It first turns yellow then darker
and darker until brown.
4) Using an eye dropper, fill the capsule with this brownish
liquid. You must take it right away as the capsule will
dissolve in about 5 minutes, so wash it down with half to one
glass of either juice or water.

◊ Do not use orange juice or juice with added vitamin C.

If you have done this, you have taken MMS3. You can take up to
three capsules at one time. But remember, MMS3 is still experimen-
tal. We know it is effective, but we do not know how effective it is.
You can take one capsule an hour, maybe even more. I hope it will
be the most effective MMS known, but it will be a while before that
data is known. Again, don’t let me suggest that you use this. That is
up to you and I cannot suggest it."
Martin
The following user(s) said Thank You: CLO2, Horsefeathers, mary

Please Log in or Create an account to join the conversation.

  • Page:
  • 1