Welcome, Guest

Questions on Usage, Discussion and Information

### Research Section Disclaimer

None of the products, protocols or methods here have been approved by Jim Humble. This is the research forum and was set up for those wanting to discuss and experiment with MMS, and new complimentary technologies. Any experimentation that you personally do is at your own risk. Before anything is submitted for approval it must be first approved by Jim Humble in writing and posted under his account. The main source for approved material, protocols etc, is in Jim Humble's latest book at www.jhbooks.org Each person using this Forum is considered to be completely responsible for themselves and their own personal health. Any experimentation that you personally do is at your own risk.

Page:
1

TOPIC:

Please help with making my own CDS... 04 Dec 2011 05:49 #8752

STLittle
Topic Author
Offline
Junior Member
Posts: 22
Thank you received: 22

Well I decided to make my own CDS last night and it was all going well but I think I did something wrong.

Here are my components.
two plastic juice bottles
one small pvc tube
two caps with holes in centers one air tight and the other loose fitting

okay so heres what I did
I place one bottle in a hot water dish and the other in a cold water dish
I filled the receiver bottle with 250ml of filtered water and then placed 25ml of MMS and 25ml of 1:1 acid
I placed the caps on both bottles making sure the tubing in the receiver bottle was all the way down into the solution and the reaction began to create bubbles and everything looked good.

and then it happened. just as the reaction was finished, all of the the fluid from my receiver bottle backed up into the mixture bottle. Then I looked everything over and thought that I must have forgot something and so I examined the original video with Andreas and looked over my own equipment and decided to make a second hole or vent on the receiver bottle.

then I tried it again and the exact same thing happened :ohmy:

can anyone help figure out what Im doing wrong?

Please Log in or Create an account to join the conversation.

Re: Please help with making my own CDS... 04 Dec 2011 07:34 #8756

STLittle
Topic Author
Offline
Junior Member
Posts: 22
Thank you received: 22

okay I just watched another video with Jim Humble and I think I solved the issue
it looks like the problem is that hot and cold solutions will create a vacuum and equalize after awhile and so I guess this is what was going on with my own setup. So what I followed Jim Humbles example and used a smaller mixing bottle that was just big enough to contain 50ml of MMS and that seems to of solved the problem.

Please Log in or Create an account to join the conversation.

Re: Please help with making my own CDS... 04 Dec 2011 08:17 #8759

whynotme Offline New Member Posts: 19 Thank you received: 18	Hi check on futureheathtoday.com they will deliver cds in the future good luck peter
	Please Log in or Create an account to join the conversation.

Page:
1

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

MMS - MMS1 Research

Please help with making my own CDS...

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.