When you mix Sodium Chlorite with Hydrochloric Acid/Citric Acid and wait 30 seconds for activation you get MMS1. This is usually mixed with 120ml of water.
CDS is created when you put distilled water in a airtight container. Now put a shot glass inside the larger container but make sure the water doesn't enter the shot glass. Put MMS1 inside the shot glass and seal the container. Now you leave it as is for approximately 12 hours in a dark cupboard. When you return the Chlorine Dioxide gas from the MMS1 will have infused into the water. You repeat this process again (there are ways of only doing it once) to achieve 3000ppm CDS. The water will change into a yellow colour.
CDS isn't taken pure you also need to mix with water.
CDS needs to be stored in a fridge as Chlorine Dioxide evaporates above 11 degrees Celsius I believe.
1 drop of MMS1 = 1ml CDS
Some find CDS much easier to take and don't have a bad reaction as they might do with MMS1.
Check out this video by Andreas Kalcker on how to create CDS. Our very own CLO2 here on these boards created the method. Revolutionary.
www.brighteon.com/95b304c7-e0a4-4606-ac44-303c8fa3ec9e
Here are the protocols on Andreas Kalcker's website who has become the leading voice regarding CDS. Look at Protocol A and C.
andreaskalcker.com/en/cds-clo2/cds-protocols.html 
