TOPIC:

Hello,

I have painful arthrosis on my hips, and would like to know what protocol I should use.
I also have some more questions :

• I have purchased mms 1 about 3-4 years ago, can I still use it ?
• Should I go on to another protocol after some time? how long ?
• what should the mms/citric acid ratio be ? I read about people having improvments using more acid drops...
• Should I take vitamins complements ? wich ones ?

Thank you very much

Your MMS and 50% citric acid may be okay after 3 to 4 years, it depends on how it was stored.

You can test it by making a 3 drop dose of MMS1. Put 3 drops of MMS into a glass which is slightly tipped so the drops will pool at the lowest point. Then add 3 drops of 50% citric acid directly on top of the MMS drops. You can slightly rock the glass back and forth so the drops mix. A yellow color should begin to appear and may turn into an amber color plus you should smell CLO2 gas.

The first protocol you should use is The Starting Procedure Protocol followed by Protocol 1000 . Also use Protocol 3000 topically. I would use CDS with P3000. If you want to do that, let me know.

If you take any supplements they should be taken 1 hour after the last MMS dose of the day.

Hello,

Thank you for your answer.

The mms seems to work fine, I noticed a little smoke I had not noticed before,I guess it is the CLO2 gas...
Still have a few questions :

• Should mms be used only with distilled water ?
• Should I dilute dmso before spreading in my nose ? My dmso is also 3-4 years old also. I kept it in my bathroom.
• What are CDS and CDH ?

Thank you very much !

If you have access to distilled water, it is the cleanest water to use.

When using DMSO and you feel it "burning" you could dilute it with distilled water. I make up plastic dropper bottles with various DMSO dilutions: no dilution, 70% diluted and 50% diluted. I don't know the shelf life of DMSO, probably a long time.

The original CDS is chlorine dioxide (CLO2) gas dissolved in distilled water and does not contain either of the two chemicals used to produce CLO2, MMS and the activator acid. Some sellers add MMS to the CDS they sell. I think there is a problem when that is done. Future testing will prove that idea. It is easy to make CDS at home.

Note that CDS information in the link above is not quite correct, the method shown to make it dangerous, the dosing wrong and in general, overly complex. Use this method instead. It is simple, safe and accurate.

CDH is similar to MMS1 except it is more fully activated externally than MMS1. CDH is about 50% activated and MMS1 is about 10% activated. That means the residual MMS (22.4% sodium chlorite) in both MMS1 and CDH rely on stomach acid to complete the activation (release the remaining CLO2 contained in MMS). CDH is also easy to make at home.

Again, the webpage info on CDH linked above has a problem. The first video is based on testing results and is correct, but the second one is not. Also note that CDH shelf life when made as shown in the first video is 2 weeks and CDH made according to the second video has not been tested for shelf life, but is probably a very short time.

CDS and CDH dosing when using Protocols is explained here .