TOPIC:

Okay.... one week into my mms treatment using the overnight method
with HCI activator - here is my update:

We are not having all the nausea as before, and no signs of diarrhea yet,
but our problem now is that our throats are hurting. I try to drink more
water to lessen the irritation, but both my Mom & I have scratchy, sore
throats from the new activator. They feel like they've been burnt, and
it bothers us all through the day and evening.

Now, I'm curious if this should be happening - Once my mixture has
been 'cured' for 12 hours, I have been keeping it in the fridge, and it
seems to be losing strength as the days go by. Right before my first
batch ran out, I was taking 4 drops and barely tasting anything. But
now that I am using a brand new batch, 3 drops are really intense.
Is that typical for it to lose strength as the days go by? The first time
I open the airtight jar after curing, I step outside to let the gases
escape in the open air....could that be affecting it?

How do I lessen the throat irritation?

Now, I know that I am supposed to reach 6 drops per hour for protocol
2, but it's been a challenge to go above 3 drops. How do I up it when
my throat is constantly hurting? Can I take 3 drops worth, flush it down,
and then immediately take another 3 drops, instead of guzzling 6 drops
at once? Or would it work to take 3 drops every half hour? Also... do
I have to be using a full 6 drops an hour before I can incorporate
the mms2? I have the pills, but have not begun to use them yet as I
want to do this right and get the most benefit from them.
On that same topic.... what is the best way to use the mms2?

How do I work my way up to 6 drops? Do I add a half drop every
few hours to see how I tolerate it? And if I have an extra sensitive
system (which seems to be the case)...am I actually getting more
benefit from a smaller dose...so perhaps a higher dose is not necessary?
My Mother's side of the family has always been very sensitive to any kind
of medication, even cough syrup, so we generally take half doses.

I would really appreciate it if someone could find the time to answer
each of these questions. I know it's a lot to ask, but some of these
things don't have the clearest instructions, and I really need some
advice.

Thank you.

Hi TimeLady,

Thanks for sharing your experiences with us.

It's good to know that nausea is no longer a problem now that you're taking the CDH.

Regarding the throat irritation, there can be some if you're not putting the CDH into enough water. So first of all, how many ml of CDH are you taking per dose and how much water are you adding to it?

Next, what size batch of CDH are you making? Are you pouring it into smaller bottles and always keeping it cold and with a good sealing cap on and immediately putting it back into the fridge after taking out your dose?

Last, what activator are you using? HCl or Citric Acid? And what is the concentration of your activator? If the concentration is 10% HCl for example, it will make your CDH extremely hot - or high in ppm.

Awaiting your reply,
Scott

To avoid taste simply ut MMS1 activated into gel capsules. No taste. No irritation.
I find that caps hold 15 drops, 5 MMS, 5 Citric 5 DmSO however you could go 6 6 and 3 DMSO
Or you can split it into two capsules.
So maybe try MMS with HCl activator, in gel caps, with DMSO.
MMS2 is taken in capsules.

Truthquester, thank you for your reply.

I am making a small batch every 5 days - 10ml mms, 10ml 4% HCI, 220ml water.
I would make a larger batch, but I need to locate a larger sealed container first.
The size I am making is being used by 2 people, hence the 5 days.

We are taking 1ml per drop. So far, for a 3 drop dose I have added about 4oz
of water, plus a chaser immediately after.... so I would thing that should be
plenty of water. The problem I have with adding more water initially, is that I
have a hard time getting it all down while holding my breath...lol

I put it in the fridge as soon as it 'cures', pull it out to get my doses, and put it
right back in the fridge as soon as I'm done. It's out of the fridge for no more
than 2 minutes at a time.

Can someone please tell me more about the DMSO? What is it, what does it
do, how is it used?

DMSO is synthetic Aloe Vera according to one source.
It is a solvent/penetrant and when used w/MMS carries MMS deeper into cells past biofilms etc. DMSO makes MMS taste "better" but I prefer no taste. no aversion build up. No smell. No holding breath.
DMSO nullifies the potency of MMS some so more drops are required to achieve results.
Equestrian aisle of local tack shop is where it is most often found. Or online.

Ray,

I am interested in trying the pill method. Since I need to be taking at
least 6 drops an hour, what size of capsules should I buy, and would I
need to take more than one pill at a time? How many drops of each
solution should I put into each pill for that size (6 drops) dose?


Are these the right items I should be buying??

www.wps4sale.com/SPD/500-unseparated--size-2---80000119-1346900126.jsp

www.wps4sale.com/SPD/dmso-pure--4-oz---80000027-1335735808.jsp

The caps are 1/2 size of 0 which hold 15 drops. So size 0 or maybe 00 is what I buy. DMSO looks right, about $1/oz retail.
5 drops MMS, 5 activator wait 25 seconds add as much as 5 DMSO. Put in capsule. I use a dropper bottle to do this. This 5 drop dose is equal to a 3 drop dose w/o DMSO. DMSO reduces potency. So to achieve 6 drop dose simple double 5 drop doses to ten of each. You can use any size capsule when mixing in a separate bottle.

Hi TimeLady,

From what you're saying, you're doing everything right.

Maybe your throats are just still irritated (or raw) from when you accidentally did the 10ml of CDH per dose in the beginning and you just need to stop for awhile and let yourselves recover from that.

Rev Ray's idea sounds real good to me.

You can use CDH-12 for capsules too but if you do it I would recommend that you use a very small quantity of MMS and HCl - like just enough for a day at a time:

For example:
Combine 1ml of MMS with 1ml of HCl in a tiny glass bottle with an airtight cap. Don't add any water to this. It will be fully activated after 10 minutes and then you should put it into the fridge to let cool down for about a half hour before opening it the first time. Then take a dropper and extract enough to fill your capsules.

Charlotte called the above, "Jim's Hot Sauce" and every 2 drops of it contains 1 drop of MMS.

Take care,
Scott

Truthquester wrote:

Rev Ray's idea sounds real good to me.

You can use CDH-12 for capsules too but if you do it I would recommend that you use a very small quantity of MMS and HCl - like just enough for a day at a time:

For example:
Combine 1ml of MMS with 1ml of HCl in a tiny glass bottle with an airtight cap. Don't add any water to this. It will be fully activated after 10 minutes and then you should put it into the fridge to let cool down for about a half hour before opening it the first time. Then take a dropper and extract enough to fill your capsules.

Charlotte called the above, "Jim's Hot Sauce" and every 2 drops of it contains 1 drop of MMS.

Take care,
Scott

Scott,

I have taken some time to better know and understand CDH today
I'll get some HCl 4% for the next kits I build.
As I'd like to recommend the CDH-12 method, can you help me understand the metric values better?
Above you say 1 ml of each, ten minutes, refrigerate.
Is this now a 1 day 24 drop dose as Protocol one suggests and if not how many drops is 2 ml?24? if so 1/4 teaspoon (level) is 20 drops.
As I understand this it would be six drops CDH-12 to achieve a 3 drop dose
This CDH 12 in capsules, may become my preferred method.
TIA
Ray