TOPIC:

It appears to me that eveyone is trying to re live their high school days like when the teacher leaves the room and says come up with your own ideas and we will discuss it when I get back.

Slow down eveyone -- too many of you are trying to out do the teacher here. It is not a contest! Wait on Jim Humble and his team for further comments, I am sure they are writing proceedures as we speak. Let them test the new product.

So -- what have we learned so far?

1/ We know how to make MMS1, we know the activation time & we know how to take it. Okay we all got that part-- the basics.
2/ We now have CDS, we know how to make it the simple & safe way per the video.
3/ So what do we need to know about CDS?
I) We kneed to know how to store it to keep the gas in solution--below 11c & out of UV light. What period of time will it last in the fridge?
II) We need to know how to messure the concentration of CLO2 in the solution so we can take the proper safe amount each time. We need a chart.
III) Can it be transfered over a period time in a sealed air tight bottle then cooled down again when it reaches it's destination to re absorb the gas into the solution?
IV) How does this solution get absorbed into our bodies if the gas comes out of solution above 11c ? Wouldn't the gas fill our stomach & get vented out the mouth?

We have many questions yet to be answered.
Plus there is IV directions to learn and needles all this is still in the discovery stage.

It is good to ask question and share ideas but it is best to wait for approval before giving others the green light on your new ideas. This is called due diligence and quality control or damage control.

I don't know technical side of this forum (I own vBulletin one), but if we could have category or something equivalent of forum, I'd like to suggest forum for CDS, to place all different topics related to research of CDS.

And there we could discuss all different aspects, like basic procedures how to make CDS, more advanced ones etc...

In Jim's video, he says it should last 2 - 3 months, if kept refrigerated with an airtight seal. His bottles are clear, though. I'm wondering if dark bottles would keep it longer. Of course, he's probably using it more than most so it probably doesn't sit around long, at his location.

I'm also wondering about a difference in dosages. It's possible that the absence of acid may reduce the amount needed to get the job done. Without the nausea, there's no real way to measure that as we don't know the exact effect of the acid on the efficacy. From what everyone is saying, the CDS seems to be having a stronger effect. Unfortunately, since there is still a question about the mechanics of exactly how MMS works and no idea about the effect of removing the acid, we'll just have to try it and see what happens.

I'm seldom sick but I use it to brush my teeth, every day. So I have some effects I can compare - such as how long it will last in a teeth brushing dilution, what it tastes like when it's spent, how it compares at solidifying and removing mucous from the mouth, first thing in the morning. That sort of thing. And, of course, the differences when used for odors and cleaning - which is what I use it for, mostly.

There are MANY things I've WANTED to try with MMS, but I'm a fraidy-cat! So I won't be doing anything TOO crazy. And I am SO appreciative that Jim included the info about what type of tubing NOT to use - in his email!! THAT'S the kind of stuff I want to avoid!

Okay folks just what I was saying the other day and that was to wait on Jim for his instructions. His instructions are smiple and the equipment is easy to attain for basically most people.

Summing up his video.
1/ heat source -- electric heating element
2/ 2 oz baby bottle with nipple
3/ 8 oz baby bottle
4/ two 4 oz dropper bottles
5/ distilled water
6/ thermometer to maintain the hot water at about 180F
7/ 1/8 plastic tubing
8/ measuring divice to measure 1oz of sodium chlorite & 1oz citric acid into the 2oz baby bottle
9/ container for the ice water (ice & water are the same temp until all the ice has melted so no need to remove the water right away)
10/ container to hold the hot water

Let the process continue for two hours or until the MMS has reached its end point when it stops producing CLO2.
Then transfer the CDS into the two 4oz bottles.

Jim did not mention anything about the drops such as does three drops of CDS equal 3 drops MMS. Since he did not say anything to this then I would expect them to be equivalent in potency. Jim did not say to get test strips or meters to measure the ppm of CLO2. Lets keep it simple to make it readily available to everyone.

Advantages:
No acid in the solution of which many are allergic.
No acid reduces the heximer affect.
The taste is much easier for people to accept.

NOW, if you did not mind the taste of MMS1 like myself then I would assume that the original way is still acceptable.

I am sure that there may be more efficient ways or other ways of doing this proceedure but Jim is speaking to the masses so lets keep this in mind when Jim is giving instructions.

The only question I have about CDS, is how to use the newly created product? Is it intended to be used as with familiar protocols? The 2 4oz bottles that are created....are we assuming this just becomes the new source for the drops we typically use...example protocol 1000, 3 drops per hour...Im assuming thats 3 drops of the CDS we just learned to make...is that the idea? 3 drops that we mix with water or juice and drink? Just that the taste now wont be as bad?

Hi Bill
Thank you, this simple information is appreciated.
Moyra T

yes -- that is what I understand to be correct

Thanks Bill for the simple list. I saw Jims new video and it also was simple. We have different types of people here. Some are much more educated than others, and some need only simple instructions. IN fact more need the simple instructions. Everyone just think about it. Thanks Bill

Calgaryjml wrote:

The only question I have about CDS, is how to use the newly created product? Is it intended to be used as with familiar protocols? The 2 4oz bottles that are created....are we assuming this just becomes the new source for the drops we typically use...example protocol 1000, 3 drops per hour...Im assuming thats 3 drops of the CDS we just learned to make...is that the idea? 3 drops that we mix with water or juice and drink? Just that the taste now wont be as bad?

No, Calgaryjml - the new CDS is measured in mLs - typically it has been 1 mL is equal to 3 or 4 drops of MMS, activated.

Here you just take 1mL of CDS, put it in some water, and you're good to go. I use a 3mL syringe that I have removed and discarded the needle. I pull up 1mL and drop it into a shotglass full of water.