Welcome, Guest

Page:
1
2

TOPIC:

seals in Jar for Shot Glass method 24 Oct 2012 15:30 #25390

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

Easy question for those in the know: When using the Shot Glass method, please confirm the PPM of the finished product(CDS) is alone determined by the amount of MMS1 & CA placed in the "shot glass".... and does one remove the "liners/seals" from the lid that ensues a tight seal on the jar, and if they are to be removed to avoid contamination how is the jar sealed to insure the manufacturer of the CDS?

Thanks!

Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 24 Oct 2012 22:48 #25444

jescola
Offline
Senior Member
Posts: 76
Thank you received: 63

Charlotte,
I bought two empty 3 litters plastic jars. So no need to remove seals. They have plastic foam seal, and
looks to work perfect. Left in a small and dark room, no chlorite smell at all, and no explosions :-)

Your method (described in other post) is amazing!
I did two batches, 1.5 Liters each, and using 60mL MMS1.
My plan is to dissolve it to have hourly dose of "a cap" that has about 5mL, so I'm planning to
dilute the CDS @3000ppm in 4 parts of water to obtain CDS @600ppm.
So I can fill the cap and dump it in a glass of water.
Again, thank you for your pictures and drawings.
Jorge

• MMS / CDS Training Seminars
• MMS Home Training DVD
• MMS / CDS Newsletter

MMS vs. FDA fundraiser - Contribute today and help us stop the FDA:
www.indiegogo.com/MMSvsFDA

How to support Genesis II Church and MMS at no cost:
www.genesis2forum.org/index.php?option=com_kunena&func=view&catid=12&id=9558&Itemid=66#9558

The following user(s) said Thank You: CLO2

Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 24 Oct 2012 23:19 #25449

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

OK...so my thick brain can absorb this. Big mouthed jar with a large volume of surface area(water), filled to 1/2 volume or less (1 liter jar filled with 1/2 liter distilled water). Is there a chart/graph that dictates the mount of MMS1 (activated) necessary vs. receiver water volume(50 drops MMS1 vs. 1/2 litter distilled water= 6000ppm CDS)??

I saw some jars that would fit the bill at Wally World..About 1 litter wide mouth glass storage jars with a rubber/silicon seal with a metal latch that seals the top. What do you think?

Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 25 Oct 2012 02:10 #25452

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	Thank you...My mind is still not right with the process of determining the PPM...but it is late. I will look for the 2 liter wide mouth you suggest and go from there. To quote Aaaarrrnold...."I'll be back". The following user(s) said Thank You: CLO2
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 25 Oct 2012 13:17 #25469

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	When do expect these experiments to be completed (with detailed instructions and PPM levels). This sounds so much easier than drops.
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 25 Oct 2012 22:32 #25486

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

OK....I HATE to sound and appear like the COMPLETE idiot...However I am a complete virgin in all of these matters so please be gentle and advise me, in the most simple terms possible: the quantities of activated MMS1(or dry) needed vs. water to come up with about 6000ppm in the receiving jar(best guess on size). Pam told me how to determine the PPM for the finished product...but it still not sink in on the proper procedure. I have the strips, but the method to determine the ppm is still vague. Just talk to me if I am a 10 yr old and all should be well. It sounds like I still need a beaker for the high ML measurements.

Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 26 Oct 2012 11:17 #25501

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

So...to get a higher PPM either increase the MMS1 to 55-60ml OR run the process twice, using the same RECEIVER water but changing the MMS1 solution? Have you seen this....?

michaelharrah.us/index.php/Info-Sheets/karl-s-method-of-making-cds-info-sheet.html

If you look at the procedure for making his MMS1 solution with dry chemicals(directly under the photo), it sounds a lot like your technique for the same. I WONDER the PPM for this Frankenstein!

Addendum: I just found your post titled "Re: CDS "Shot Glass Method" & Variations - HAD ANY EXPLOSIONS? 08 Sep 2012 08:21" with detailed instructions and PPM readings...Great info.

Please Log in or Create an account to join the conversation.

Last edit: by vector. Reason: new information found

seals in Jar for Shot Glass method 26 Oct 2012 23:15 #25541

vector Topic Author Offline Premium Member Life Is Good Posts: 123 Thank you received: 15	I would appreciate any update on your tests. The following user(s) said Thank You: CLO2
	Please Log in or Create an account to join the conversation.

seals in Jar for Shot Glass method 02 Nov 2012 22:57 #25895

vector
Topic Author
Offline
Premium Member
Life Is Good
Posts: 123
Thank you received: 15

Help me here... Using the shot glass method with 35mm of mms in 1 liter of water you have about 3000ppm. Using 1 tsp of sodium chlorite & citrus acid powder in one liter of water you have 700ppm.

"Yes, I have seen Karl's post on using dry powders. That method does work to make CDS and as I mentioned in a previous post, using 1 teaspoon (US) of MMS1 & citric acid I have measured 700 ppm in 1 liter of resulting CDS using the equipment shown in the high range chart."

I'm not sure how you have a much lower ppm reading. I know I'm missing something, I have all equipment needed to use Karl's method but will not go forward till this PPM is straight in my mind.

Please Log in or Create an account to join the conversation.

Page:
1
2

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

seals in Jar for Shot Glass method

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.