Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Index
Questions on Usage, Discussion and Information
Research discussion
MMS - MMS1 Research
NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker
### Research Section Disclaimer

None of the products, protocols or methods here have been approved by Jim Humble. This is the research forum and was set up for those wanting to discuss and experiment with MMS, and new complimentary technologies. Any experimentation that you personally do is at your own risk. Before anything is submitted for approval it must be first approved by Jim Humble in writing and posted under his account. The main source for approved material, protocols etc, is in Jim Humble's latest book at www.jhbooks.org Each person using this Forum is considered to be completely responsible for themselves and their own personal health. Any experimentation that you personally do is at your own risk.

TOPIC:

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 25 Nov 2011 15:54 #8431

  • kwag
  • kwag's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 175
  • Thank you received: 201
On my way to Home Depot NOW! :)

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 25 Nov 2011 21:30 #8437

  • kwag
  • kwag's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 175
  • Thank you received: 201

I thought about that, but also was concerned about metal lids. You can, however, get plastic lids for the canning jars.

I am using the stoppers from the wine making store, the ones with holes in them. (I had bought a bunch to use to make sauerkraut-making kits for friends for Christmas) - The holes exactly hold 3/8 inch tubing from the hardware store. So, it's either slip a venting needle (whatever is used) in with the 3/8 inch tubing, or drill a small hold in the stopper to hold the venting needle. I may well go the second route.

When I get my first batch done, will do photos and post here. We have some grand opportunities to share our ideas - I am hoping others will share their photos, like Michael did.
Pam


Just finished making mine with 1/4 inch black rigid tubbing from Home Depot (couldn't get clear, because they had only soft tubbing) and I used cork stoppers! Really cheap. :)
Here's the pic. Doesn't show the "Basketball Needle" for releasing pressure. I put that in after the picture was taken.
The following user(s) said Thank You: Michael Harrah, Victor, Peter Mican, pam, rondellejones, Edi

Please Log in or Create an account to join the conversation.

Last edit: by kwag.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 02:28 #8441

  • rondellejones
  • rondellejones's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 2
Thanks to all of you for sharing your methods and ideas. I've used MMS for quite some time but I can not get my spouse to use it b/c she can not stand the smell or taste. Any time I make any she refers to it as "your poison". LOL

She HAS noticed that I have not been sick in 2 years so if I can get her to tolerate a form of the MMS then she can see what it feels like to have freedom from sickness.

In regards to making the CDS, since the chemicals seem to be very powerful, I am concerned about using plastic. I noticed a few of you on here have the same concerns. For example someone mentioned pitting of the plastic tubing.

I am excited to make my first batch of this but it will take me longer to source all glass materials, especially the glass tubing. I am considering using plastics for my first batch.

For those of you that are more experienced in working with MMS/CDS using plastic, which types of plastics are the best to use?

Just looking around the house, most of the plastic bottles I see are PET. Would that be ok? Some heavier plastic containers are made of HDPE...

Thanks!
The following user(s) said Thank You: Michael Harrah

Please Log in or Create an account to join the conversation.

Last edit: by rondellejones.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 03:08 #8442

  • kwag
  • kwag's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 175
  • Thank you received: 201
Hi rondellejones,

I prefer glass bottles. For the tubbing, I guess plastic is ok, because once the gas goes through, you can wash it with running water, and also the corks.
See, I don't mind drinking some wine with some little scraps of cork in the bottle, but I would definitely mind drinking MMS with toxic rubber residue :D
Just a suggestion ;)
The following user(s) said Thank You: Michael Harrah, rondellejones

Please Log in or Create an account to join the conversation.

Last edit: by kwag.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 03:53 #8443

  • Michael Harrah
  • Michael Harrah's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1209
  • Thank you received: 1554
Hi rondellejones,

In response to your question about plastics, my two bottles are PET. See the pics of my 'quickie' set up (genesis2forum.org/index.php?option=com_kunena&func=view&catid=16&id=8260&limit=6&limitstart=6&Itemid=66#8282). Right after generating, the smaller bottle that had the MMS and HCl activator is yellow, but after exposure to the air for a few days it goes back to clear. I do not see any pitting in it at all, nor in the other clear PET bottle for receiving the gas.

The tubing I am using looks to me like it is HDPE it is a translucent whitish (just like 'natural' hdpe), and is quite stiff. I have not noticed any pitting with it. It is yellow right after generation but then after a few days in the air it clears up again. I think it is food grade because it is the same tubing they sell for installing icemakers. At home depot (lowes too I am sure) it comes in a 25' roll and is pretty cheap. The label says "Watts" is the maker: "polyethylene tubing 1/4" x .170" x 25 ft."

I have generated twice now, 800 ml and 1000 ml and have not noticed any pitting of the plastic, and in fact the plastic looks good.

I do want to work on a glass setup. If someone finds sourcing for this, please post some links.

Thanks,

Michael
The following user(s) said Thank You: Victor, rondellejones

Please Log in or Create an account to join the conversation.

Last edit: by Michael Harrah.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 04:28 #8444

  • Michael Harrah
  • Michael Harrah's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1209
  • Thank you received: 1554
Hi Jegz,

In regard to your question about what happens with the chlorous acid part of an MMS1 dose once it gets inside the body, I don't have an answer. I don't recall seeing Jim address that. He has been more focused on the chlorine dioxide since that is the active ingredient.

I have heard that the chlorous acid is unstable and reacts quickly and some of it becomes chlorine dioxide, but I think it has not really been studied like chlorine dioxide has.

Michael
The following user(s) said Thank You: rondellejones

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 06:56 #8445

  • sun
  • sun's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 23
  • Thank you received: 15
Had a question about this new method. Is the activated MMS left in the bottle still have some uses or is it completely lost of all its chlorine dioxide after the gas had been pumped into the saline solution?

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 26 Nov 2011 11:28 #8447

  • Edwin3110
  • Edwin3110's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 652
  • Thank you received: 515
I think there is no need to worry about the plastic unless the plastic cannot withstand CDS like cracking and ect... other than that... CDS can eliminate most toxic including plastic toxic....

CDS is toxic removal... so most material will not be bring harm and only need to avoid metal goods to be use for CDS....
Minister of Health, Penang. Malaysia.

Creator of CDH Plus 1000
A Protocol that can adjust the strength of CD and SC for individual needs.
• Read More

• Easy way to support Jim Humble, MMS
The following user(s) said Thank You: Peter Mican, rondellejones

Please Log in or Create an account to join the conversation.

Re: NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker 27 Nov 2011 16:30 #8457

  • pam
  • pam's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4593
  • Thank you received: 3703
Mark has a little series of videos on making CDS on his FB page - They're not on YT at this time, that I can see.
The following user(s) said Thank You: Edwin3110

Please Log in or Create an account to join the conversation.
Index
Questions on Usage, Discussion and Information
Research discussion
MMS - MMS1 Research
NEW ! CDS Clorine dioxide solution (MMS) by Andreas Kalcker

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.