TOPIC:

Re: cds strength 21 Sep 2012 20:42 #23803

radio joe
Offline
New Member
Posts: 6
Thank you received: 2

hello ,
Still learning
you mention 1mL of cds...how can one gather 1mL of the cds? is this not the gas that is produced by the activated mms? can you explain a lil please im just trying to get it right thanks

pam wrote:
It's hard to tell, based on what you've given us.

To test for ppm, combine 1mL of CDS and 9mL of water. I use a shot glass. Dip your chlorine dioxide (not chlorine, not PH) testing strip into that 1:9 mixture as per the directions on the bottle. (I think it's 2 second dip, then 10 second wait, but go by the direction) - determine the strength by the color swatch on the testing strip bottle. Multiply that number by 10 and you will have your PPMs per liter

If the number is "off the scale" high, (i.e., the swatch turns black) you're going to have to redo the test with 1mL of CDS and 19mL of water. Then multiply THAT amount by 20 to get your ppm/L

JH has tried to standardize the CDS to around 3000 ppm/L - there the dosing is 1mL is equivalent to 3 drops of MMS. I usually end up with 6000 ppm/L, and my dosing is .5 mL ..

I, personally, have found that it's easier for me to adjust the size of my doses to equal 3 drops of MMS than to dilute the mixture to equal 3000 ppm/L.

Please Log in or Create an account to join the conversation.

Re: cds strength 21 Sep 2012 22:28 #23813

pam
Offline
Platinum Boarder
Posts: 4593
Thank you received: 3702

To make CDS, you instill the chlorine dioxide gas into water. That gives it a measuring capacity. If you have a 3000 ppm/L of chlorine dioxide (that's what you need the testing strips for to find out what your ppm/L is), and you use 1mL of CDS, you have the equivalent of 3 drops of regular activated MMS.

Jim Humble has a YouTube on JimHumbleLive dated 2/9/2012 revised, as I recall, and he will show you how to make CDS "the old way" (which is actually the way I make it, because I make it in volume, but not in the volume someone who retails it would make) -- that will give you a clearer picture of how it is made, using a heat source for the MMS/CA mixture.

We've since played around on the forum here with several other ways to make CDS (it's always about combining MMS and CA and siphoning off the chlorine dioxide gas into water, regardless) -

Please Log in or Create an account to join the conversation.

Page:
1
2
3

Forum

Index

Questions on Usage, Discussion and Information

Research discussion

CDS Research

Technical talk: CDS

cds strength

Disclaimer: This forum provides general information and discussion about medicine, health and related subjects. The words and other content provided in this forum, and in any linked materials, are not intended and should not be construed as medical advice. If the reader or any other person has a medical concern, you should consult with an appropriate licensed Physician or other Health Care provider. Never disregard professional medical advice or delay in seeking it because of something you have read on this forum or any other linked materials. If you think you may have a medical emergency call your Doctor or 911 immediately.

The views expressed on this forum and website have no relations to any academic, hospital, practice or other institutions. This website is at times monitored. Anything the host finds offensive may be removed at his discretion. The host disclaims responsibility for anything posted by third-parties. Any statements on this forum/website related to Chlorine Dioxide, MMS or variations are not FDA approved to diagnose, cure, mitigate, treat, or prevent any disease.

MMS (Master Mineral Solution) is Sodium Chlorite 28% (22.4% Sodium Chlorite, 5.6% Inert Salts and the remainder water) plus an acidic activator (usually 50% Citric Acid or 4% Hydrochloric Acid) when combined produces Chlorine Dioxide.

License: Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.