Welcome, Guest
Username: Password: Remember me
MMS: sodium chlorite (NaClO2) 28%
MMS1 or Activated MMS: chlorine dioxide (ClO2)
  • Page:
  • 1
  • 2

TOPIC:

Red rash on fingers 20 Apr 2021 16:23 #68729

  • Vic C
  • Vic C's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 1
Hi guys, firstly thank you for all you do on here! I have read all posts and answers and they have helped so much. BIG fan of course of Jim Humble and those that are saving lives.

I have a question... I have already done protocol 1000 once before and apart from rushing in too fast (fool ha) all went well. 

A few weeks ago I got an infection in my finger (from the smallest cut) and stupidly(?)... i took antibiotics for it. The first round didn't work so i had to go on to harder ones. 

I did protocol 1000 again after that to help my body a bit as i got another cut and didn't want to risk needing more antibiotics. Towards the end of the 21 days I got bumps on my hand... i think i should have stayed on the protocol but didn't. (i did a few days on the clay too) but i stopped. Since stopping, they've become worse. My fingers swelled so much at the weekend that i couldn't bend my knuckles very well. I took some mms and immediately the swelling started to come down... the swelling is still going down (i am back on three drops every hour for eight hours now) so thats good however i seem to be left with a red rash (not particularly painful and only itches at night) on the bottom part of my fingers. (i believe this part, where the rash is and the bumps were, was where my dogs lead was held while walking her and as i am training her i have to pull on it sometimes... i'm certain theres a link there as it was exactly where the lead touches)

My question... would you carry on with protocol 1000 and add in the bentonite clay? Do a liver flush? What would you suggest? 

Sorry for long post but wanted to give as much info as poss!

Thank you again x

Please Log in or Create an account to join the conversation.

Red rash on fingers 20 Apr 2021 20:00 #68733

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5396
  • Thank you received: 4261
Apply full-strength CDS to the fingers and hand followed by some DMSO. You can continue to ingest MMS1 internally. 

If you don't have CDS, you can easily make CDH which will also be 3000ppm CLO2 used externally. 


 
The following user(s) said Thank You: mariannhvw

Please Log in or Create an account to join the conversation.

Red rash on fingers 20 Apr 2021 22:49 #68735

  • Vic C
  • Vic C's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 1
Thank you so much for the quick reply! 

I don't have distilled water but we do have a very good filter on our tap (basically turns the water in to what would be Spring water) would that be ok to use? It's what I've been using along side MMS internally.

So the CDH looks just like the spray bottle I have made as per Jim's instructions? Same thing? The only difference being you put in the fridge/dark and leave it for 12 hours?

Thank you again 🙏

Please Log in or Create an account to join the conversation.

Red rash on fingers 20 Apr 2021 22:56 #68736

  • Vic C
  • Vic C's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 1
Oooh also, I only have citric acid! Is that ok? 🙏

Please Log in or Create an account to join the conversation.

Red rash on fingers 21 Apr 2021 02:16 #68737

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5396
  • Thank you received: 4261
Filtered water should be fine to use. 

Citric acid may be okay to use. Since you have been making and using MMS1 with it and have not reported any discomfort, then it is working for you. Some people have stomach problems when using citric acid. 

No, CDH is not the same as MMS1. MMS1 only contains 10% of available CLO2 when made, so for use topically there is not much CLO2. There is residual MMS and citric acid, however. 

CDH is 50% activated, so there is more CLO2 available for topical use. Both CDH and CDS contain 3000 ppm CLO2 when used externally. Used internally, CDS will not increase in CLO2 content, but CDH will increase its CLO2. 

Regular CDH takes 8-12 hours to activate. There is a newer version that can be made in 5 minutes. 

 
The following user(s) said Thank You: Vic C

Please Log in or Create an account to join the conversation.

Red rash on fingers 21 Apr 2021 08:11 #68739

  • Vic C
  • Vic C's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 1
Thank you so much!

How would i make it in 5 mins?

Also, is it ok to do protocol 1000 for a prolonged amount of time? as i've already done two rounds this year and only recently ended the second one and started it up again. Intuitively, i feel its a yes and as Jim and others say, you do it until you are well. But just want to check... oxidation and all that ha 

Thank you again x

Please Log in or Create an account to join the conversation.

Red rash on fingers 21 Apr 2021 09:47 #68740

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5396
  • Thank you received: 4261
I think it is okay to continue following P1000 as long as you need to do so. 

I have made a short video on how-to-make 300ppm CDH in 5 minutes, but have only posted it on Telegram Messenger. I can post it on Brighteon.com tomorrow and post the link here. 

Please Log in or Create an account to join the conversation.

Red rash on fingers 21 Apr 2021 18:02 #68741

  • Vic C
  • Vic C's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 1
Ah great ok, could I get your telegram name to add you? I'm not too sure how to post mine 🤔 

 

Please Log in or Create an account to join the conversation.

Red rash on fingers 22 Apr 2021 05:05 #68743

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5396
  • Thank you received: 4261
Making 100ml of 300ppm CDH in 5 minutes

CDH - Going Beyond CD & CDS (The story behind the development of CDH by Scott McRae)
mmsinfo.org/infosheets/CDH_Scott_McRae's_chapter_in_kerri's_2014_book.pdf

If you join my Telegram channel  t.me/MMSinfo  I can add you to my contact list. 

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.
  • Page:
  • 1
  • 2