Welcome, Guest
Username: Password: Remember me

TOPIC:

Where can I purchase GOOD 80% sodium chlorite in the US 03 Oct 2021 02:45 #71522

  • 56Explore74
  • 56Explore74's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 4
Hello I’m new here but I purchased, supposedly 80% sodium chlorite but it’s apparently weaker because I only get a medium yellow color when it’s activated with 50% citric acid. Never gets close to a light brown color after 20 to 30 seconds. The MMS mixture is correct so it’s not that. I figure the newly purchased sodium chlorite must be old or less than advertised. What do you think? And where is a good place to purchase the good stuff (sodium chlorite)?

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 03 Oct 2021 17:48 #71540

  • AquaPure1966
  • AquaPure1966's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 03 Oct 2021 19:12 #71541

  • 56Explore74
  • 56Explore74's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 4
Thank you so much! I clicked on the link you provided and amazingly that’s exactly what I purchased but mine only turns to a medium level yellow while never approaching brown. I bought quite a large amount and got it at a lower price by bidding so I was wondering if they might have sent something inferior because I paid less. Does yours turn nearly brown when activated? No smoke or vapors are visible on mine. 

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 03 Oct 2021 23:05 #71546

  • Skeller
  • Skeller's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 28
  • Thank you received: 7
I notice when i put my mms drops in clear glass it looks yellow but when i put them in something white, it looks brown. See what your MMS looks like in a white dish 
The following user(s) said Thank You: 56Explore74

Please Log in or Create an account to join the conversation.

Last edit: by Skeller.

Where can I purchase GOOD 80% sodium chlorite in the US 04 Oct 2021 01:03 #71548

  • 56Explore74
  • 56Explore74's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 4
Thanks Skeller!
 I tried what you recommended and you was absolutely right, I was amazed as it did turn light brownish. I  really didn’t want to have to send it back so now I’ll probably keep it. Thanks again so much for sharing! This information probably will help others also.

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 05 Oct 2021 12:09 #71580

  • Skeller
  • Skeller's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 28
  • Thank you received: 7
Do make sure you have the strong smell. I ordered from the same place. Haven't received yet. Sure was a good price so worth the risk to me. 

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 05 Oct 2021 14:02 #71581

  • 56Explore74
  • 56Explore74's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 4
It does have the smell and tastes bitter. I should do a potency test on it to see the actual strength before I’ll really know. If I’m going to spend the money and the time then I want the absolute best. The sales price was very good compared to other places. The seller is supposed to send me the production records for the batch I received but he assured me it’s 80% when I contacted them. So far I haven’t received it and that was 2 days ago.
The following user(s) said Thank You: Skeller

Please Log in or Create an account to join the conversation.

Where can I purchase GOOD 80% sodium chlorite in the US 06 Oct 2021 09:35 #71592

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5061
  • Thank you received: 3890
How did you make a 22.4% sodium chlorite solution from those 80% NaCLO2 flakes? Recipe used? 80% NaCLO2 flakes should last 20 years if stored properly.

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.

Where can I purchase GOOD 80% sodium chlorite in the US 06 Oct 2021 11:30 #71594

  • 56Explore74
  • 56Explore74's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 4
Sodium chlorite powder or flakes (usually available in pool supply stores, chemical supply houses, and/or sometimes online). Sodium chlorite is most often available at 80% sodium chlorite, with the remaining 20% mostly table salt and possibly some trace minerals.

Distilled water . Distilled water is best, but in a pinch, if it is absolutely not available you can use bottled water, though this is not preferred. Never use tap water.

An accurate (to 1 gram) scale with a tare feature that measures grams.

1 large glass jar preferably at least 1½ liter size with a plastic lid (a Ball Mason jar works well). (Note: Mason jars come with metal lids, but plastic lids designed specifically to fit Mason jars can be purchased separately in many stores that have kitchen supplies or online.)

1 long handled plastic spoon (serving spoon style).

Some extra clean plastic tablespoons or teaspoons for measuring and mixing purposes.

Extra plastic containers , (two or three) more or less 1 liter capacity for measuring.

A measuring device that measures up to 100 milliliters (a graduated cylinder, measuring cylinder or mixing cylinder such as used in laboratories or High School science class works well).

White or unbleached coffee filters .

A glass bottle with a plastic lid for storing the finished product, preferably amber or green colored glass. Or, you might want to use smaller bottles 2 or 4 ounce size if you are bottling this solution for several people.

MMS Recipe

— The large 1 to1½ liter jar will be your mixing container.

— In one of the smaller plastic containers you will need to measure out 720 grams of room temperature distilled water. In another plastic container, measure out 280 grams of sodium chlorite powder.

The easiest way to do the above step is as follows:

— Take 1 empty plastic container and place it on the scale. The scale will show the weight of your plastic container. At this point, with the plastic container on the scale, push the tare button on the scale. This will set the counter to zero and therefore when you put ingredients, either water or powder, into the plastic container sitting on the scale, it will only measure the weight of what you put into the container and will not count the weight of the container.

— Using the method above (and the tare button), in a plastic container measure out 720 grams of room temperature distilled water on the scale. It helps to have a clean plastic spoon on hand to “take out” water if you go over, or to “add in” a little water if you fall short. This measurement of 720 grams of water should be exact. Once you have this water measured out exactly in your plastic container, pour the water into the larger glass jar. (We suggest using this smaller plastic container to measure out the water, as it is easier than handling a heavier and larger glass jar on a small scale.)

(Note: Use room temperature water. For the sake of those who may have read my older books or who have seen older videos of mine on the internet, in the past I taught a method of heating the water to make MMS. I have since determined this is not really necessary. For many years I always heated the water nice and hot, (though never over 150 degrees), but I quit doing that a long time ago and it works fine with room temperature water. Simply let it sit a little while longer as described below.)

— Next, tare another clean, dry plastic container. In this container, measure out exactly 280 grams of sodium chlorite powder on the scale. You can use a clean dry plastic spoon to scoop the sodium chlorite powder out of its container into your measuring container, and likewise use the spoon to add more powder or take out enough to get an exact measurement of the 280 grams of sodium chlorite powder. Once the measurement is exact, add this sodium chlorite powder to the 720 grams of water in the glass mixing jar.

— Once you have the 280 grams of powder and the 720 grams of distilled water in the glass jar, take your long handled plastic spoon and stir well. Keep stirring until the powder or flakes are fully dissolved. This may take several minutes.

— Once it is fully dissolved let it sit in a dark place for 24 hours. During this sitting time any unwanted particles will sink to the bottom of the jar.

(Note: Depending on the quality of your sodium chlorite, initially your mixture may have a yellow tint to it, but by sitting for 24 hours, it should turn nearly clear, like water, after this process. There is always a possibility it may have a slight discoloring after 24 hours. If it has a slight discoloring (slight yellow tint) you can still use it, but if it’s badly discolored, you might want to buy different sodium chlorite powder or flakes.)

— After 24 hours, I prefer to put it through an unbleached coffee filter just to be sure any unnecessary filler particles are filtered out. It would be nice to have perfectly pure sodium chlorite, but it’s not always that way. So let it sit 24 hours, and then use a coffee filter to filter it.

Test That Your MMS is Good

You now have MMS, but at this point, before bottling for storage, it is important to do the following test to be sure you have hit the mark of the true Jim Humble MMS formula. Here is how to test that you have the correct formula:

— MMS is a 22.4% solution of sodium chlorite in water. One hundred milliliters of MMS liquid should weigh 122 grams, this is the ideal. If it falls in the range of 120 grams to 124 grams it is usable, but 122 grams, or very close to it, is best.

— Take a container that is marked to measure 100 milliliters, be sure it is clean and dry at the start. (A graduated cylinder with milliliters marked on it works well for this.) Put the container on the scale and then press the tare button, as this must be a precise measurement. The tare feature will set the scale to zero grams when you put the completely empty container on the scale. Carefully pour your MMS liquid into the container on the scale until it reaches the 100 ml mark. If you accidently go over 100 ml, use a clean plastic spoon to remove some of the liquid, until you get it exactly to 100 ml.

— The 100 ml you have measured out should weigh 122 grams. (Note: The solution you make of 22.4% sodium chlorite in water is denser than just plain distilled water, so for the test, if you measure out the 100 ml of your MMS liquid it will weigh more than 100 ml of plain water, because you have added the sodium chlorite powder to it. The weight you are shooting for is 122 grams for 100 ml of the MMS solution you just mixed up.)

— If you have gone over the 122 grams, say it comes out to 123 or 124 you can carefully add more distilled water (but first pour the 100 mls you weighed out back into your total solution before adding more water). Then add just a little more distilled water at a time, to your entire mixture. After adjusting, do the above test again and see if you can get it to 122 grams.

— If you come up under 122 grams, say you are at 120 grams, you can add in a little more sodium chlorite powder. Again, pour the 100 mls you weighed out back into your solution before adding more sodium chlorite powder, so you are adding to your entire solution. Add a little bit at a time, stirring again to make sure it’s fully dissolved, then do the above test again to see if it’s come up closer to exactly 122 grams.

(Note: I suggest adding a very little water or powder at a time to adjust, so you don’t drastically go too far. This process is somewhat like “adjusting the spices” if you were cooking a meal. It’s best to go low and slow until you get it right.)

Activator Acids—How to Make

MMS Protocols for health recovery call for “activated MMS”. MMS needs a food-grade acid to activate it and the two combined produce chlorine dioxide. There are several acids that can activate MMS, including the juice of a fresh lemon or lime, or vinegar. However, we most often use either 50% citric acid, or 4% HCl (hydrochloric acid). When using these two acids in these percentages always use 1 drop of acid to 1 drop of MMS. Both of these acids, in these percentages, are a 1-to-1 ratio with MMS. In other words, mix 1 drop of either of 50% citric acid or 1 drop of 4% HCl, to every 1 drop of MMS. The standard activation time for mixing these drop-for-drop doses using 50% citric acid or 4% HCl is 30 seconds. See the MMS Health Recovery Guidebook (available at: jhbooks.org) for full instructions on how to mix and use MMS. This includes for instructions on how to activate MMS using lemon, lime or vinegar as the proportions and activation time is different for these than when using 50% citric acid or 4% HCl.

(Note: When making up an activator acid solution to use with MMS, it is preferred to always use distilled water. In the case where distilled water is not available purified bottled water can be used, nevertheless, distilled water is the best choice.)

Please Log in or Create an account to join the conversation.