Welcome, Guest
Username: Password: Remember me

TOPIC:

test strips 19 Oct 2020 07:47 #66292

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4219
  • Karma: 1
  • Thank you received: 3185
Orv, make a 3 drop dose of MMS1 as usual; 3 drops of MMS + 3 drops of 4% HCL. Wait 30 seconds, then add 120ml (4 fl oz) of water.

Take one test strip and put the tip of it into the MMS1 + water mix, for 2 seconds.

Remove from the MMS1 solution with the pad facing up. Do NOT shake off excess water.

Wait 10 seconds, then compare the color of the test strip with the colors on the container.

The closest color match is the CLO2 ppm.

Let us know what your strips reads!

Please Log in or Create an account to join the conversation.

test strips 19 Oct 2020 07:54 #66294

  • Brian92
  • Brian92's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 1
CLO2 yeah, since my MMS seems to be 2x as it should be, I think I might take an 1/8 of a drop with 8oz of water instead of a 1/4 of a drop with 4oz of water just to be safe, you think that would be reasonable?

Please Log in or Create an account to join the conversation.

Last edit: by Brian92.

test strips 19 Oct 2020 16:14 #66297

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4219
  • Karma: 1
  • Thank you received: 3185
Yes, that should work. Then increase slowly, as usual.
The following user(s) said Thank You: Brian92

Please Log in or Create an account to join the conversation.

test strips 20 Oct 2020 08:08 #66303

  • orv
  • orv's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 88
  • Thank you received: 22
Thank you thank you thank you, that's exactly what I needed and it was the dark color so that means the sodium chlorite is still very good. Thank you for your great patience CL02 with me but some things are difficult for me to figure out and just want to make sure it was still good to be able to help my friend. Not only does she have cancer in the rectum but several other diseases, several. Fibromyalgia, lupus, type 2 diabetes, great fogginess in the mind, arthritis, and more . Chlorine dioxide will work with all these I know and believe. I've used it since 2009 and it has never failed yet. Unless its your time to graduate and fly away, we don't know when that is so we keep fighting until we fly. Chlorine dioxide is the best weapon I know or the other derivatives of it. I will keep you informed as we fight, thank you CL02 you are a blessing . You didn't know who she is but she is the most Godly person i know and she helps muttitudes of people and you wouldn't even know she has any phisical affictions because she never complains nor tells anyone about them. She just trusts God. A real woman of faith. Really loves people and the unloved. I'm going to be helping her all thur this. Thank you again. Orv

Please Log in or Create an account to join the conversation.

test strips 20 Oct 2020 20:35 #66314

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4219
  • Karma: 1
  • Thank you received: 3185
Orv, glad you were able to prove your SC (MMS) is okay.

Be sure she begins taking MMS by first following the Starting Procedure and then slowly increase dosing following P1000. With so many problems to fix, she will have to very slowly increase dosing and probably stay at low dosages for many days before increasing again.

Let us know her progress!

Please Log in or Create an account to join the conversation.

test strips 29 Oct 2020 18:02 #66402

  • Gyuri
  • Gyuri's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 7
I just bought the 50 pack LaMotte test strips off amazon. (0-500 ppm)
I always use a shot glass to mix my 2 chemicals,
then I pour a bit of water in the shot glass after 30 to 60 seconds of activation to make sure I get all of the good stuff
Add this to 4 oz (120ml) of good water
Dip test strip into this solution for 2 seconds. Dont shake water off
Wait 10 seconds and compare color on strip to chart on container
Mine showed just slightly darker than 25 ppm
Later I made myself a 6 drop maintenance solution, just for curiosity, I measured it, 50 ppm, makes sense to me because it was double the previous 3 drop shot , but with the same 4oz of water
Is that what you were looking for?

Please Log in or Create an account to join the conversation.

test strips 29 Oct 2020 18:05 #66403

  • Gyuri
  • Gyuri's Avatar
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 7
I just bought the 50 pack LaMotte test strips off amazon. (0-500 ppm)
I always use a shot glass to mix my 2 chemicals,
then I pour a bit of water in the shot glass after 30 to 60 seconds of activation to make sure I get all of the good stuff
Add this to 4 oz (120ml) of good water
Dip test strip into this solution for 2 seconds. Dont shake water off
Wait 10 seconds and compare color on strip to chart on container
Mine showed just slightly darker than 25 ppm
Later I made myself a 6 drop maintenance solution, just for curiosity, I measured it, 50 ppm, makes sense to me because it was double the previous 3 drop shot , but with the same 4oz of water
Is that what you were looking for?
The following user(s) said Thank You: CLO2

Please Log in or Create an account to join the conversation.

test strips 29 Oct 2020 18:59 #66407

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 4219
  • Karma: 1
  • Thank you received: 3185
Your testing results seem correct.

Please Log in or Create an account to join the conversation.

test strips 21 Nov 2020 07:44 #66609

  • orv
  • orv's Avatar Topic Author
  • Offline
  • Expert Boarder
  • Expert Boarder
  • Posts: 88
  • Thank you received: 22
Cl02 I again tested my mms-1 and hcl the 3 drop dose and added 4 oz of distilled water and waited 30 ses and put test strip pad in first for 2 sec and pulled out pad faced up and waited 10 sec and compared to test bottle and it was 100 and I thought it was supposed to be 250 or 500 ??? I did several times all the same. So went back in freezer and pulled out another bottle a quart size and it had never been opened but always left in freezer with 5 more quart bottles the same. It test the same the green color at 100. I thought if you kept them in the freezer they would last forever almost. What do you think ??? These bottles are maybe 5 years old. First it shouldn't be in the green range of 100 right ??? should be at 250 or 500 ??? Thank you for your help By the way when we took her off mms-1 and put her on cds at 1 ml last weekend she felt better the next day. So each day increased each day to 6 mills with no reaction but then she started to get totally exhausted so now down to 3 mills of cds. oh she just told me today that she also has had sleep apnea for quite a while also. She has to get up every one to two hours to urinate every night. I just got my sleep apnea breathing device yesterday for myself and after talking to technician and telling them I have to get up all night long also technician told me that that is a common occurrence for anyone with sleep apnea. So last night I used the machine woke up this morning very refreshed and never got up once all night long to my great surprise. I didn't think that was going to happen. Info just for everyone's information which I thought was very interesting to say the least. Because I thought I had a prostate problem, Yeah. Waiting on your answers. Thank you

Please Log in or Create an account to join the conversation.