Welcome, Guest
Username: Password: Remember me

TOPIC:

I understand the CDS process, however I need clarification on the components used 30 Mar 2018 17:44 #58112

  • Truthquester
  • Truthquester's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1279
  • Thank you received: 1404
Hi Aliyah,
You should be able to purchase 25% Sodium Chlorite and 30 to 32% HCl which you can dilute down to 4% HCl from one of the chemical stores in your area. Just ask at each one until you find one that can supply you. Here in Jakarta I get my supplies from Alam Kemia. They carry everything I need and can order a liter of 25% sodium chlorite for me from Merck in Germany, so it's very high quality. The HCl is technical grade but by the time you dilute it down to 4% with distilled water, it's also pretty pure. By the way, Amidis water which we can buy in most stores here in Jakarta, is distilled.

I was also able to buy brown bottles, chemical resistant caps and 3ml pipettes from Alam Kemia - all shown in the attached photo below. You might have to ask them to get out their catalogues to find all the stuff for you.



Let me know if I can help you in any other way.

All the best,
Scott
I'm Scott McRae, creator of "The Antidote" & CDH with CLO2's help (Charlotte Lackney)

- I did a CDH injection / Chlorine Dioxide (CLO2) injection / IV push of 10ml of dilute 50ppm CDH / CLO2 into my blood 3 times in 11 hours & did before & after blood tests that showed that it did NO HARM to my blood, liver or kidneys. This suggests the possibility that CDH / CLO2 is a potential LIFESAVING MRSA cure, VRE cure, CRE cure, AMR cure, Ebola cure, HIV cure, Cancer cure, etc., since it appears to be safe intravenously at 50ppm.

- Join our group on MiWi (was deleted off of Facebook): mewe.com/join/coronavirusebolasolutions
- Every ml of CDH contains 1 drop of MMS, so 1 drop of MMS = 1ml of CDH
- MMS is 7 to 10% activated in 30 seconds while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops
Attachments:
The following user(s) said Thank You: AK

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 30 Mar 2018 21:29 #58114

  • Cindy
  • Cindy's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 14
  • Thank you received: 4
Can you use this same method using the 50% citric acid.

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 00:11 #58116

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5379
  • Thank you received: 4247
Cindy, you can use 50% citric acid to make MMS1, CDS and CDH, but it tastes terrible in MMS1 and CDH. And, some people have stomach problems with citric acid.

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 01:37 #58118

  • AK
  • AK's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 39
  • Thank you received: 21
Ok I am so very confused. First confusion deals what the initials of all products mean. For example CDS,CDH, CL02, MMS2, and it goes on and on. I get so confused without having an index to follow.

Also on the bottom of this post it says "2 mil of 3000 ppm orginal CDS equates to 1 drop of MMS1
Bottom of post from truthquester above says"1 mil of 3500 ppm equal to 1 drop MMS1"
Which is it? 1 or 2 mil? Frustrated in trying to learn with all the initials and no table to refer to of either.
Yes I know of the chart that has the conversion of ML to drops but still does not make sense.
In addition I have a CDS solution that is 35,000 ppm which is totally out of the scope of what anyone is talking about.
Just adds to the confusion. Maybe it is just me who is experiencing this learning curve that seems so incredibly confusing. Sorry for expression my irritability about this but damn it is time consuming and I'm not learning like I would like to be, not giving up but still I'm at my wits end.
Margaret Kelley

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 05:13 #58122

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5379
  • Thank you received: 4247
Definition of Terms starts on page 5 of Jim's latest book. And on my website here.

Also on the bottom of this post it says "2 mil of 3000 ppm original CDS equates to 1 drop of MMS1. Bottom of post from truthquester above says"1 mil of 3500 ppm CDH equal to 1 drop MMS1"

Both statements are for ingestion only, not external use. Refer to my two charts.

MMS1 is 10% activated externally. The other 90% should happen in a normal stomach.
CDH is 50% activated externally. The other 50% should happen in a normal stomach.
CDS is 100% activated externally. No further increase in CLO2 content in a stomach, normal or not.

In addition I have a CDS solution that is 35,000 ppm which is totally out of the scope of what anyone is talking about.

A chemist who used to frequent this forum said CDS stronger than 6000 ppm was dangerous. Be sure your bottle of 35K ppm CDS stays cold & never sees direct sunlight! If I hear a loud bang, I will know what happened. :(
The following user(s) said Thank You: Truthquester, Sky, AK

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 17:09 #58128

  • AK
  • AK's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 39
  • Thank you received: 21
Ok it is a cold dark place and will stay there until I figure out a way to dispose of it.
How can I do that? I got it from a company on the list from the handbook not really knowing about the strength aspect nor how to use it. I am not going to use it and was not until finding out the proper way. Thank you. Please advise what I can do with it so it won't be a danger to anyone.
Margaret Kelley

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 17:18 #58129

  • Mancini987
  • Mancini987's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Hello and thank you all for the responses. Originally, I watched Dr. Andreas Kalcker's video and he showed beakers ,tubes, syringes etc. I was successful in the overnight method which is very simple and effective. I truly hope this helps my loved one on his way to recovery. Thank you all, and may you find peace and healing.

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 31 Mar 2018 18:23 #58130

  • CLO2
  • CLO2's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 5379
  • Thank you received: 4247
AK, if you store that strong CDS in a fridge, it will be fine.

It does have a useful purpose and that is for topical applications. You should be able to use it full strength on skin problems. I and others have had good luck doing that. Be sure the bottle cap seals well so no CLO2 gas escapes. When CDS is below 50 F (10 C) it will tend to stay in a water solution which is why we store it in a fridge when possible.

When you take out some CDS from the bottle, put the cap back on as soon as possible. You can use a glass dropper, syringe or pipette.

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.

I understand the CDS process, however I need clarification on the components used 01 Apr 2018 00:10 #58131

  • jmac
  • jmac's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 171
  • Thank you received: 139
AK, your 35,000 PPM CDS can be easily diluted down to the normal 3,500 PPM of CDS by combining it with refridgerated distilled water in a ratio of 1 part 35,000 PPM CDS to 9 parts cold distilled water. Put the combined solution in an amber bottle(s) with plastic lid(s) and store it in the fridge. Use it in any protocol that uses CDS.
The following user(s) said Thank You: Truthquester, CLO2

Please Log in or Create an account to join the conversation.