### Research Section Disclaimer

None of the products, protocols or methods here have been approved by Jim Humble. This is the research forum and was set up for those wanting to discuss and experiment with MMS, and new complimentary technologies. Any experimentation that you personally do is at your own risk. Before anything is submitted for approval it must be first approved by Jim Humble in writing and posted under his account. The main source for approved material, protocols etc, is in Jim Humble's latest book at www.jhbooks.org Each person using this Forum is considered to be completely responsible for themselves and their own personal health. Any experimentation that you personally do is at your own risk.

check Taking Unactivated MMS Drops for 10 Months in All My Water - 4 Drops per Liter All Day, Every Day

More
30 Nov 2025 17:20 #87665 by JasonWang
If I want to replicate the MMS1 1000 protocol using the original formula CDH, what exactly is the recommended dosage method for the original formula CDH? Frequently opening the bottle cap will inevitably cause chlorine dioxide to evaporate. Is there any way to minimize this evaporation loss?

Please Log in or Create an account to join the conversation.

More
30 Nov 2025 18:48 #87666 by JasonWang
If one milliliter of the 4% hydrochloric acid version of CDH is equivalent to one drop of MMS1, then I feel that only a glass pipette can accurately extract one milliliter of CDH. Does this one milliliter of CDH still need to be mixed with 100 milliliters of distilled water before oral administration? This extraction process is quite time-consuming, and I believe it would cause significant chlorine dioxide volatilization. Another question: why does the 2% hydrochloric acid version have a much longer shelf life? Why don't you use this version? Is it because the 4% hydrochloric acid version of CDH makes it easier to calculate the chlorine dioxide dosage? Translated with DeepL.com (free version)

Please Log in or Create an account to join the conversation.

More
30 Nov 2025 18:56 #87667 by JasonWang
I also want to ask whether the bumps and vibrations during transportation of the CDH solution will increase the leakage of chlorine dioxide? After preparing the 4% CDH solution, if I immediately store it below 10°C, can I ensure a two-week shelf life? What temperature conditions does the solution require during the 12-hour activation period? Should it be stored below 10°C only after activation is complete?

Please Log in or Create an account to join the conversation.

More
30 Nov 2025 19:04 #87668 by JasonWang
Is the dosage you sent me for making CDH video one milliliter equals one drop of MMS1? Does it produce 4000ppm CDH?

Please Log in or Create an account to join the conversation.

More
01 Dec 2025 01:00 - 01 Dec 2025 01:15 #87669 by CLO2

Is the dosage you sent me for making CDH video one milliliter equals one drop of MMS1? Does it produce 4000ppm CDH?
Hi Jason. 

The original CDH as shown in the video, was meant to produce an equivalent dosage for a one drop MMS1 dose using 1ml of CDH. As I  recall, the CLO2 ppm of that CDH was about 3500. Scott's newest CDH is called CDH 4000 and does measure about 4000 ppm. 

I just remembered a solution for hourly dosing of CLO2 when away from home, such as when at work. 
 

I hope you can translate the text in the image. Basically the idea is to make up hourly doses, including the dilution water, into each 120ml amber glass bottle, whether it be MMS1, CDS or CDH. All you have to do to ingest an hourly dose is to remove the bottle cap and drink the dose. Takes about 10 seconds. The bottle cap is removed only one time.

 
Last edit: 01 Dec 2025 01:15 by CLO2.

Please Log in or Create an account to join the conversation.

More
01 Dec 2025 01:45 #87670 by CLO2
Here is a new feature in Brave Browser I discovered today. Right clicking on an image gives you an option to extract text from an image. 
 

Please Log in or Create an account to join the conversation.

More
01 Dec 2025 16:21 #87671 by JasonWang
This suggestion is excellent, but I've noticed a contradiction:

    Preparing a 240ml CDH solution, extracting 3ml each time using a pipette at the maximum dose, 8 times a day (and then diluting this 3ml CDH solution with 120ml distilled water before consumption?), means this one bottle of solution can be extracted 80 times. Opening the bottle so many times will inevitably lead to a significant amount of chlorine dioxide evaporating. Even if it's aliquoted into multiple 120ml bottles and consumed all at once, the chlorine dioxide evaporation problem isn't solved (because chlorine dioxide evaporates during CDH extraction). I'm wondering if it's possible to directly prepare a CDH solution of equal strength in 120ml bottles and then consume it all at once, thus completely resolving the chlorine dioxide evaporation issue. What do you think? Are there any other better methods to achieve this?

    Also, regarding step 5 in the video—keeping the bottle in a dark place for 12 hours—is there a temperature requirement for this 12-hour storage? And regarding step 6 in the video—is the temperature in the refrigerator between 0 and 10 degrees Celsius?

    I'm also planning to put the solution in the trunk of my car. Will the vibrations and bumps during a long journey negatively affect the 120ml solution?

    I'm learning to make my own CDH. I've heard that CDH can greatly help people with long-term smoking addictions quit. Is that true?

    Sorry for asking so many questions at once, but I really want to learn these techniques.

Please Log in or Create an account to join the conversation.

Time to create page: 0.409 seconds