I understand the CDS process, however I need clarification on the components used

I understand the CDS process, however I need clarification on the components used 10 Feb 2018 14:02 #57560

Mancini987
Topic Author
Offline
New Member
Posts: 2
Thank you received: 0

first all, hello all, I am a new member, I appreciate the valuable information I have learned from here and other websites.

As you may know, there are many ways to make CDS. What I am not sure is the correct tubing used and the type of bottles.

I am also having a difficult time obtaining a vet type syringe to release the gas.

I never say anything is easy to do, I know with the right components I can do this, however I dont want to get the wrong bottles, then they may leak some bpa or other toxin into the solution.

If anyone can provide a list, with links to where I can just click and buy the correct parts, I would greatly appreciate it.

I am just confused about what type of tube, the correct gauge of the needle, the types and names of the bottles, and the types of tops with rubber stopper and their matching sizes.

Thank you.

James

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 10 Feb 2018 20:56 #57562

CLO2 Offline Platinum Member Posts: 5393 Thank you received: 4260	That method is not recommended because it is not a safe way to make CDS. Explosions have occurred, even to me. Use the two container, overnight method. There are some articles on my website mmsinfo.org/ you can read. To purchase a kit to make CDS try here.
	Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 16 Feb 2018 09:43 #57613

Truthquester
Offline
Platinum Member
Posts: 1279
Thank you received: 1404

Why not make CDH which is much easier to make? Here's a video that CLO2 made to show people how to make 240ml in a snap. I do just one thing different which is to use very hot (80-90 degrees Celsius) water to make it fast. By the time the bottle has cooled down (maybe 2 hours) your CDH is ready to use.

Just a thought,
Scott

I'm Scott McRae, creator of "The Antidote" & CDH with CLO2's help (Charlotte Lackney)

- I did a CDH injection / Chlorine Dioxide (CLO2) injection / IV push of 10ml of dilute 50ppm CDH / CLO2 into my blood 3 times in 11 hours & did before & after blood tests that showed that it did NO HARM to my blood, liver or kidneys. This suggests the possibility that CDH / CLO2 is a potential LIFESAVING MRSA cure, VRE cure, CRE cure, AMR cure, Ebola cure, HIV cure, Cancer cure, etc., since it appears to be safe intravenously at 50ppm.

- Join our group on MiWi (was deleted off of Facebook): mewe.com/join/coronavirusebolasolutions
- Every ml of CDH contains 1 drop of MMS, so 1 drop of MMS = 1ml of CDH
- MMS is 7 to 10% activated in 30 seconds while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 17 Feb 2018 16:06 #57621

Infinite life
Offline
New Member
Posts: 6
Thank you received: 2

Thanks for the tip scott. I presume you add the 10 ml of SC and 10ml of HCL to the 220 mlof very hot water and cap it immediately. How long will this last or for how long can we keep it in the refrigerator. I am writing to you from India where the room temperatures are in the ranges of 18-40 degrees Celsius.
Also if you can help me calculate how much CLO2 i am getting from my solution. I have just found that with the bottle dropper I am using I get approx only 80 drops comes in 10 ml, this is much less than the calculations made in jims book which is around 24 drops per ml or 240 drops for 10 ml. which means the drops from my bottle are larger- so am at a loss in calculating how much CLO2 is being delivered. For the CDH however I am using a syringe so the ml calculation is quite accurate and I follow the 1 ml = 1 drop formula.

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 17 Feb 2018 19:26 #57622

CLO2
Offline
Platinum Member
Posts: 5393
Thank you received: 4260

Infinite life, you can measure drops quite accurately with a 1 ml syringe. When using the "original" standard of 24 drops/ml, one drop is 0.042 ml. If you use the "new" standard that Jim is now suggesting, which is 20% larger at 20 drops/ml, then one drop is 0.05 ml. Note that all testing results you find on my website uses the "original" standard of 24 drops/ml.

To use CDS and CDH with MMS1 protocols, you can use these charts. Those charts also show the calculated amounts of CLO2 that may be available.

The residual MMS in CDH (50%) will be effective in stomach acid for about 2 weeks from generation. Fridge storage is recommended to keep CLO2 loss down when the bottle cap is removed, since CLO2 tends to stay in water solution when kept below 10C.

The following user(s) said Thank You: Truthquester

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 05:03 #57628

Truthquester
Offline
Platinum Member
Posts: 1279
Thank you received: 1404

Infinite Life, it's just as CLO2 has said and yes, you cap it immediately to keep the CLO2 in the bottle. If you follow the "recipe" you should end up with about 3500ppm or 3.5mg of CLO2 per ml of CDH. With CDH I think it's best to not think about drops with the exception that each ml of freshly made CDH (within the 2 week period of being made and being stored in the fridge), is equivalent to 1 fully activated drop of SC (MMS). After 2 weeks the amount of CLO2 in each ml of CDH will remain at 3500ppm at least a year, especially if it's kept in the refrigerator.

Lastly, it's important to use a plastic cap that has a rigid plastic seal and NOT a silicone/rubbery seal which will be melted over time by the CLO2.

Hope that helps,
Scott

I'm Scott McRae, creator of "The Antidote" & CDH with CLO2's help (Charlotte Lackney)

- I did a CDH injection / Chlorine Dioxide (CLO2) injection / IV push of 10ml of dilute 50ppm CDH / CLO2 into my blood 3 times in 11 hours & did before & after blood tests that showed that it did NO HARM to my blood, liver or kidneys. This suggests the possibility that CDH / CLO2 is a potential LIFESAVING MRSA cure, VRE cure, CRE cure, AMR cure, Ebola cure, HIV cure, Cancer cure, etc., since it appears to be safe intravenously at 50ppm.

- Join our group on MiWi (was deleted off of Facebook): mewe.com/join/coronavirusebolasolutions
- Every ml of CDH contains 1 drop of MMS, so 1 drop of MMS = 1ml of CDH
- MMS is 7 to 10% activated in 30 seconds while CDH made with 4% HCl is about 50% activated in the bottle. This is why CDH is far less nauseating than MMS drops

The following user(s) said Thank You: CLO2

Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 17:28 #57630

Infinite life Offline New Member Posts: 6 Thank you received: 2	Thanks. so how much ppm of CLO2 will a freshly activated drop or drops have. also if the CDH has 3500ppm for a year, how much ppm will it have within the first week of preparation. Strictly as per the recipe. Thanks in Advance.
	Please Log in or Create an account to join the conversation.

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 22:52 #57636

CLO2
Offline
Platinum Member
Posts: 5393
Thank you received: 4260

Infinite life, as Scott said, CDH made according to our recipe, should produce about 3500 ppm CLO2 when made. Over time, the CLO2 concentration will slowly reduce depending on how it is stored, how often the bottle cap is removed and how long the cap is off the bottle, exposure to light, etc.

The 50% residual MMS (sodium chlorite), which would normally activate in stomach acid, seems to disappear after about 2 weeks. However, the existing CLO2 will remain the same at about 3500 ppm.

And to repeat what Scott also said, CDH is dosed in milliliters, not drops.

The following user(s) said Thank You: Truthquester

Please Log in or Create an account to join the conversation.

Last edit: by CLO2.

I understand the CDS process, however I need clarification on the components used 26 Mar 2018 10:28 #58075

AleAidid Offline New Member Posts: 1 Thank you received: 0	Hai Scott ..... I am so grateful I found you.... I am residing in Makassar Indonesia and have been using MMS since December last year, and have even advocated it to family and friends. We are quite keen to migrate to CDH, CDS or else the tablet forms, but have yet to find any suppliers here in Indonesia? Would you know of anyone...or perhaps...yourself? Salam, Aliyah
	Please Log in or Create an account to join the conversation.

TOPIC:

I understand the CDS process, however I need clarification on the components used 10 Feb 2018 14:02 #57560

I understand the CDS process, however I need clarification on the components used 10 Feb 2018 20:56 #57562

I understand the CDS process, however I need clarification on the components used 16 Feb 2018 09:43 #57613

I understand the CDS process, however I need clarification on the components used 17 Feb 2018 16:06 #57621

I understand the CDS process, however I need clarification on the components used 17 Feb 2018 19:26 #57622

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 05:03 #57628

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 17:28 #57630

I understand the CDS process, however I need clarification on the components used 19 Feb 2018 22:52 #57636

I understand the CDS process, however I need clarification on the components used 26 Mar 2018 10:28 #58075